Unit · AXIAL-PISTON PUMP
A7VO160EP2/63R-VPB01PR902250892
Axial piston pump Bosch Rexroth series A7VO, type code A7VO160EP2/63R-VPB01P, material number R902250892. Nominal size: NG 160. Axial piston unit: bent-axis design, variable, nominal pressure 350 bar, maximum pressure 400 bar (A7V). Operating mode: pump, open circuit (O). Control device: proportional control electrical Positive control U = 24 V (EP2). Direction of rotation: viewed on drive shaft (R). Sealing material: FKM (fluoroelastomer) (V). Drive shaft: parallel keyed shaft according to DIN 6885 (P). Mounting flange: ISO 3019-2; 4-hole (B). Port plate for working lines: SAE flange ports A and S at rear (metric fastening thread) (01). Connector for solenoids: DEUTSCH molded connector, 2-pin – without suppressor diode (P).
- Number
- R902250892
- Type code
- A7VO160EP2/63R-VPB01P
- Group
- A7VO 160
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R909611231 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R902251158 | CONTROL Assembly parts list →L | 1 | ||
| R909650455 | CONTROL LENS, RIGHT-HAND ROTATION | 1 | ||
| R902276402 | HOUSING | 1 | ||
| R909156654 | SCREW PLUG | 1 | ||
| R909083416 | RETAINING RING | 1 | ||
| R909831663 | ROTARY SHAFT LIP SEALD | 1 | ||
| R909832084 | SUPPORTING DISC | 1 | ||
| R902253127 | SEAL RINGD | 1 | ||
| R909156989 | SCREW PLUG | 2 | ||
| R909153075 | SETSCREW | 1 | ||
| R909153975 | SETSCREW | 1 | ||
| R909152459 | SEALING NUT | 2 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Bent-axis design, variable, nominal pressure 350 bar, maximum pressure 400 bar | A7V |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 160 | 160 |
| Control device | Proportional control electrical Positive control U = 24 V | EP2 |
| Series | Series 6, index 3 | 63 |
| Direction of rotation | Viewed on drive shaft | R |
| Sealing material | FKM (fluoroelastomer) | V |
| Drive shaft | Parallel keyed shaft according to DIN 6885 | P |
| Mounting flange | ISO 3019-2; 4-hole | B |
| Port plate for working lines | SAE flange ports A and S at rear (metric fastening thread) | 01 |
| Connector for solenoids | DEUTSCH molded connector, 2-pin – without suppressor diode | P |