Unit · AXIAL-PISTON PUMP
A11VO200LRDS/10R-NZD12K02-SR902003178
Axial piston pump Bosch Rexroth series A11VO, type code A11VO200LRDS/10R-NZD12K02-S, material number R902003178. Nominal size: NG 200. Axial piston unit: swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar (A11V). Operating mode: pump, open circuit without charge pump (O). Control device: power controller fixed setting, with pressure cut-off, with load-sensing (LRDS). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Drive shaft: splined shaft DIN 5480 for single and combination pump (Z). Mounting flange: SAE J744 ‒ 4-hole (D). Working port: SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 (12). Through drive: 101-2 (B) 7/8 in 13T 16/32DP B (K02). Standard/special version: special version (S).
- Number
- R902003178
- Type code
- A11VO200LRDS/10R-NZD12K02-S
- Group
- A11VO 200
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R909447379 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R909438675 | CONNECTION PLATE Assembly parts list →L | 1 | ||
| R909441653 | REGULATOR Assembly parts list →L | 1 | ||
| R909437659 | CONTROL Assembly parts list →L | 1 | ||
| R909429581 | CONTROL Assembly parts list →L | 1 | ||
| R909441993 | BELL HOUSING Assembly parts list →L | 1 | ||
| R902003500 | HOUSING | 1 | ||
| R909445854 | SETSCREW | 1 | ||
| R909445855 | SETSCREW | 1 | ||
| R909152459 | SEALING NUTD | 2 | ||
| R913009671 | STRAIGHT PIN | 1 | ||
| R909153861 | SCREW PLUGD | 1 | ||
| R909151979 | SCREW PLUGD | 1 | ||
| 41 | R909153816 | SCREW PLUG | 1 | |
| 98 | R902095612 | SEAL KIT | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar | A11V |
| Operating mode | Pump, open circuit without charge pump | O |
| Size (NG) | 200 | 200 |
| Control device | Power controller fixed setting, with pressure cut-off, with load-sensing | LRDS |
| Index | Size 40 … 130 | 0 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) | N |
| Drive shaft | Splined shaft DIN 5480 for single and combination pump | Z |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Working port | SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 | 12 |
| Through drive | 101-2 (B) 7/8 in 13T 16/32DP B | K02 |
| Standard/special version | Special version | S |