Unit · AXIAL-PISTON PUMP
A A10VSO 28 DFLR/31R-VPA12H00 -SO160R902489681
Axial piston pump Bosch Rexroth series A10VSO, type code AA10VSO28DFLR/31R-VPA12H00-SO160, material number R902489681. Nominal size: NG 28. Axial piston unit: swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar (A10VS). Operating mode: pump, open circuit (O). Control device: pressure, flow and power controller (DFLR). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: parallel keyed shaft DIN 6885 permissible through-drive torque (P). Mounting flange: ISO 3019-2 2-hole (A). Working port: SAE flange ports according to ISO 6162, metric fastening thread laterally opposite (12). Special version no. 160.
- Number
- R902489681
- Type code
- A A10VSO 28 DFLR/31R-VPA12H00 -SO160
- Group
- A10VSO 28
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902450472 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902451761 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R902533217 | CONTROL VALVE Assembly parts list →L | 1 | |
| 10 | R910948341 | PIPING Assembly parts list →L | 1 | |
| 11 | R902489658 | POWER DIAGRAM | 1 | |
| 12 | R901230031 | TOOTHED RING PUMP Assembly parts list →L | 1 | |
| 14 | R909154478 | SCREW PLUG | 1 | |
| 61 | R910109762 | SOCKET HEAD CAP SCREW | 2 | |
| 62 | R902650190 | WASHER | 2 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar | A10VS |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 28 | 28 |
| Control device | Pressure, flow and power controller | DFLR |
| Series | Series 3, index 1 | 31 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | Parallel keyed shaft DIN 6885 permissible through-drive torque | P |
| Mounting flange | ISO 3019-2 2-hole | A |
| Working port | SAE flange ports according to ISO 6162, metric fastening thread laterally opposite | 12 |