Unit · AXIAL-PISTON PUMP
AL A10V O 45 DFLR/31R-VUC62H00 -S1868R902501896
Axial piston pump Bosch Rexroth series A10VO, type code ALA10VO45DFLR/31R-VUC62H00-S1868, material number R902501896. Nominal size: NG 45. Axial piston unit: swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (5100 psi) (A10V). Operating mode: pump, open circuit (O). Control device: pressure, flow and power controller (DFLR). Direction of rotation: viewed on drive shaft Clockwise (R). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: reduced diameter; limited suitability for through drive (U). Mounting flange: based on ISO 3019-1 (SAE) 2-hole (C). Working port: SAE flange connections according to ISO 6162, working ports UNC Fastening thread UNC; lateral top bottom For through drive (62). Special version no. 1868.
- Number
- R902501896
- Type code
- AL A10V O 45 DFLR/31R-VUC62H00 -S1868
- Group
- A10VO 45
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902456381 | BASE UNIT Assembly parts list →L | 1 | ||
| 2 | R902533492 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R902533217 | CONTROL VALVE Assembly parts list →L | 1 | |
| 5 | R910918079 | SIDE MARKER RING | 1 | |
| 10 | R910960164 | PIPING Assembly parts list →L | 1 | |
| R902443057 | POWER DIAGRAM | 1 | ||
| 0510525041 | HYDRAULIC GEAR PUMPL | 1 | ||
| 14 | R910764647 | SCREW PLUG | 1 | |
| 61 | R910109606 | SOCKET HEAD CAP SCREW | 2 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (5100 psi) | A10V |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 45 | 45 |
| Control device | Pressure, flow and power controller | DFLR |
| Series | Series 3, index 1 | 31 |
| Direction of rotation | Viewed on drive shaft Clockwise | R |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | Reduced diameter; limited suitability for through drive | U |
| Mounting flange | Based on ISO 3019-1 (SAE) 2-hole | C |
| Working port | SAE flange connections according to ISO 6162, working ports UNC Fastening thread UNC; lateral top bottom For through drive | 62 |