Unit · AXIAL-PISTON PUMP
A11VLO250EP2D/10L-NZD12K04R902023048
Axial piston pump Bosch Rexroth series A11VO, type code A11VLO250EP2D/10L-NZD12K04, material number R902023048. Nominal size: NG 250. Axial piston unit: swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar (A11V). Operating mode: pump, open circuit with charge pump (LO). Control device: electrical control with proportional solenoid with pressure cut-off (EP2D). Direction of rotation: viewed on drive shaft counter-clockwise (L). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Drive shaft: splined shaft DIN 5480 for single and combination pump (Z). Mounting flange: SAE J744 ‒ 4-hole (D). Working port: SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 (12). Through drive: 101-2 (B) 1 in 15T 16/32DP B-B (K04).
- Number
- R902023048
- Type code
- A11VLO250EP2D/10L-NZD12K04
- Group
- A11VLO 250
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R909601124 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R909438408 | CONNECTION PLATE, LL Assembly parts list →L | 1 | ||
| R909600066 | REGULATOR Assembly parts list →L | 1 | ||
| R909434665 | CONTROL Assembly parts list →L | 1 | ||
| R909433430 | CONTROL Assembly parts list →L | 1 | ||
| R909608003 | BELL HOUSING Assembly parts list →L | 1 | ||
| R909445895 | HOUSING | 1 | ||
| R909439721 | IMPELLER, LEFT-HAND ROTATATION | 1 | ||
| R909432481 | SEALING DISK | 1 | ||
| R909445855 | SETSCREW | 1 | ||
| R909445855 | SETSCREW | 1 | ||
| R909152459 | SEALING NUTD | 2 | ||
| R913009671 | STRAIGHT PIN | 1 | ||
| R909153861 | SCREW PLUGD | 1 | ||
| R909830077 | RETAINING RING | 1 | ||
| R909151259 | RETAINING RING | 2 | ||
| R909445547 | PARALLEL KEY | 1 | ||
| R909152981 | SHIM RING | 1 | ||
| R909152982 | SHIM RING | 1 | ||
| R909156764 | SHIM RING | 1 | ||
| R909153816 | SCREW PLUGD | 1 | ||
| R902123558 | SHUTTLE VALVE Assembly parts list →L | 1 | ||
| 98 | R902095613 | SEAL KIT | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar | A11V |
| Operating mode | Pump, open circuit with charge pump | LO |
| Size (NG) | 250 | 250 |
| Control device | Electrical control with proportional solenoid with pressure cut-off | EP2D |
| Index | Size 40 … 130 | 0 |
| Direction of rotation | Viewed on drive shaft counter-clockwise | L |
| Sealing material | NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) | N |
| Drive shaft | Splined shaft DIN 5480 for single and combination pump | Z |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Working port | SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 | 12 |
| Through drive | 101-2 (B) 1 in 15T 16/32DP B-B | K04 |