Unit · AXIAL-PISTON PUMP
A11VO130DRS/10R-NSD12K02-SR902025476
Axial piston pump Bosch Rexroth series A11VO, type code A11VO130DRS/10R-NSD12K02-S, material number R902025476. Nominal size: NG 130. Axial piston unit: swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar (A11V). Operating mode: pump, open circuit without charge pump (O). Control device: pressure controller with load-sensing (DRS). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Drive shaft: splined shaft ANSI B92.1a‒1976 for single pump (S). Mounting flange: SAE J744 ‒ 4-hole (D). Working port: SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 (12). Through drive: 101-2 (B) 7/8 in 13T 16/32DP B (K02). Standard/special version: special version (S).
- Number
- R902025476
- Type code
- A11VO130DRS/10R-NSD12K02-S
- Group
- A11VO 130
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902041942 | ROTARY GROUP Assembly parts list →L | 1 | |
| 2 | R902106699 | CONNECTION PLATE, RL Assembly parts list →L | 1 | |
| 3 | R902032096 | REGULATOR Assembly parts list →L | 1 | |
| 4 | R909601774 | CONTROL Assembly parts list →L | 1 | |
| 5 | R909601775 | CONTROL Assembly parts list →L | 1 | |
| 7 | R909447858 | BELL HOUSING Assembly parts list →L | 1 | |
| 10 | R902117356 | HOUSING | 1 | |
| 11 | R902132714 | PIVOT PIN | 4 | |
| 20 | R909449078 | SETSCREW | 2 | |
| 22 | R909152426 | SEALING NUTD | 2 | |
| 24 | R909153364 | SCREW PLUGD | 4 | |
| 25 | R909830782 | SOCKET HEAD CAP SCREW | 4 | |
| 26 | R909083835 | O-RINGD | 1 | |
| 27 | R909153891 | SCREW PLUGD | 2 | |
| 28 | R913016373 | SLOTTED SPRING PIN | 2 | |
| 31 | R902025477 | ORIFICE FLANGE Assembly parts list →L | 1 | |
| 32 | R902273725 | HYDRAULIC LINE Assembly parts list →L | 1 | |
| 98 | R902095609 | SEAL KIT | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar | A11V |
| Operating mode | Pump, open circuit without charge pump | O |
| Size (NG) | 130 | 130 |
| Control device | Pressure controller with load-sensing | DRS |
| Index | Size 40 … 130 | 0 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) | N |
| Drive shaft | Splined shaft ANSI B92.1a‒1976 for single pump | S |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Working port | SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 | 12 |
| Through drive | 101-2 (B) 7/8 in 13T 16/32DP B | K02 |
| Standard/special version | Special version | S |