Unit · AXIAL-PISTON PUMP
AA11VLO200LRDG/10R-NSD62K04R902030132
Axial piston pump Bosch Rexroth series A11VO, type code AA11VLO200LRDG/10R-NSD62K04, material number R902030132. Nominal size: NG 200. Axial piston unit: swashplate design, variable, nominal pressure 5100 psi (350 bar), maximum pressure 5800 psi (A11V). Operating mode: pump, open circuit with charge pump (LO). Control device: power controller fixed setting, with pressure cut-off, with pressure cut-off hydraulic remote controlled (LRDG). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Drive shaft: splined shaft ANSI B92.1a‒1976 for single pump (S). Mounting flange: SAE J744 ‒ 4-hole (D). Working port: SAE pressure and suction port at side, opposite, UNC fastening thread. Port thread, UNF with profile sealing ring based on ISO 11926 (62). Through drive: 101-2 (B) 1 in 15T 16/32DP B-B (K04).
- Number
- R902030132
- Type code
- AA11VLO200LRDG/10R-NSD62K04
- Group
- A11VLO 200
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R909441447 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R909600446 | CONNECTION PLATE, RL Assembly parts list →L | 1 | ||
| R909600503 | REGULATOR Assembly parts list →L | 1 | ||
| R909437659 | CONTROL Assembly parts list →L | 1 | ||
| R909429581 | CONTROL Assembly parts list →L | 1 | ||
| R902040712 | BELL HOUSING Assembly parts list →L | 1 | ||
| R909445889 | HOUSING | 1 | ||
| R909440149 | IMPELLER, RIGHT-HAND ROTATION | 1 | ||
| R909432481 | SEALING DISK | 1 | ||
| R909445854 | SETSCREW | 1 | ||
| R909445855 | SETSCREW | 1 | ||
| R909152459 | SEALING NUTD | 2 | ||
| R913009671 | STRAIGHT PIN | 1 | ||
| R909153378 | SCREW PLUGD | 1 | ||
| R909830077 | RETAINING RING | 1 | ||
| R909083362 | RETAINING RING | 2 | ||
| R909445547 | PARALLEL KEY | 1 | ||
| R909086230 | SHIM RING | 1 | ||
| R909086231 | SHIM RING | 1 | ||
| R909150315 | SHIM RING | 1 | ||
| R909153371 | SCREW PLUGD | 1 | ||
| 98 | R902095612 | SEAL KIT | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 5100 psi (350 bar), maximum pressure 5800 psi | A11V |
| Operating mode | Pump, open circuit with charge pump | LO |
| Size (NG) | 200 | 200 |
| Control device | Power controller fixed setting, with pressure cut-off, with pressure cut-off hydraulic remote controlled | LRDG |
| Index | Size 40 … 130 | 0 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) | N |
| Drive shaft | Splined shaft ANSI B92.1a‒1976 for single pump | S |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Working port | SAE pressure and suction port at side, opposite, UNC fastening thread. Port thread, UNF with profile sealing ring based on ISO 11926 | 62 |
| Through drive | 101-2 (B) 1 in 15T 16/32DP B-B | K04 |