Unit · AXIAL-PISTON PUMP
AA11VO130LRDS/10R-NSD62K01R902053486
Axial piston pump Bosch Rexroth series A11VO, type code AA11VO130LRDS/10R-NSD62K01, material number R902053486. Nominal size: NG 130. Axial piston unit: swashplate design, variable, nominal pressure 5100 psi (350 bar), maximum pressure 5800 psi (A11V). Operating mode: pump, open circuit without charge pump (O). Control device: power controller fixed setting, with pressure cut-off, with load-sensing (LRDS). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Drive shaft: splined shaft ANSI B92.1a‒1976 for single pump (S). Mounting flange: SAE J744 ‒ 4-hole (D). Working port: SAE pressure and suction port at side, opposite, UNC fastening thread. Port thread, UNF with profile sealing ring based on ISO 11926 (62). Through drive: 82-2 (A) 5/8 in 9T 16/32DP A (K01).
- Number
- R902053486
- Type code
- AA11VO130LRDS/10R-NSD62K01
- Group
- A11VO 130
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902041942 | ROTARY GROUP Assembly parts list →L | 1 | |
| R902087683 | CONNECTION PLATE, RL Assembly parts list →L | 1 | ||
| 3 | R909600793 | REGULATOR Assembly parts list →L | 1 | |
| R909601773 | CONTROL Assembly parts list →L | 1 | ||
| 5 | R909601775 | CONTROL Assembly parts list →L | 1 | |
| R909600789 | BELL HOUSING Assembly parts list →L | 1 | ||
| R902117357 | HOUSING | 1 | ||
| 11 | R902132714 | PIVOT PIN | 4 | |
| R909449078 | SETSCREW | 2 | ||
| R909152426 | SEALING NUTD | 2 | ||
| R909153364 | SCREW PLUGD | 4 | ||
| R909830782 | SOCKET HEAD CAP SCREW | 4 | ||
| R909083835 | O-RINGD | 1 | ||
| R909154480 | SCREW PLUGD | 2 | ||
| R913016373 | SLOTTED SPRING PIN | 2 | ||
| R909153371 | SCREW PLUG | 1 | ||
| 98 | R902095610 | SEAL KIT | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 5100 psi (350 bar), maximum pressure 5800 psi | A11V |
| Operating mode | Pump, open circuit without charge pump | O |
| Size (NG) | 130 | 130 |
| Control device | Power controller fixed setting, with pressure cut-off, with load-sensing | LRDS |
| Index | Size 40 … 130 | 0 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) | N |
| Drive shaft | Splined shaft ANSI B92.1a‒1976 for single pump | S |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Working port | SAE pressure and suction port at side, opposite, UNC fastening thread. Port thread, UNF with profile sealing ring based on ISO 11926 | 62 |
| Through drive | 82-2 (A) 5/8 in 9T 16/32DP A | K01 |