Unit · POMPA OSIOWO-TŁOKOWA
A11VLO260EP2D/11L-NZD12K04H-SR902063394
Axial piston pump Bosch Rexroth series A11VO, type code A11VLO260EP2D/11L-NZD12K04H-S, material number R902063394. Nominal size: NG 260. Axial piston unit: swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar (A11V). Operating mode: pump, open circuit with charge pump (LO). Control device: electrical control with proportional solenoid with pressure cut-off (EP2D). Direction of rotation: viewed on drive shaft counter-clockwise (L). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Drive shaft: splined shaft DIN 5480 for single and combination pump (Z). Mounting flange: SAE J744 ‒ 4-hole (D). Working port: SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 (12). Through drive: 101-2 (B) 1 in 15T 16/32DP B-B (K04). Swivel angle indicator: with BODAS Hall effect angle or linear position sensor PAL, ratiometric tension U = 5 VDC (H). Standard/special version: special version (S).
- Number
- R902063394
- Type code
- A11VLO260EP2D/11L-NZD12K04H-S
- Group
- A11VLO 260
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902008228 | MECHANIZM NAPĘDOWY Assembly parts list →L | 1 | ||
| R909600264 | PŁYTA POŁĄCZENIOWA, GWINT LEWY Assembly parts list →L | 1 | ||
| R902066101 | REGULATOR Assembly parts list →L | 1 | ||
| R909600261 | STEROWANIE Assembly parts list →L | 1 | ||
| R909600262 | STEROWANIE Assembly parts list →L | 1 | ||
| R902033822 | WSPORNIK NOŚNY Assembly parts list →L | 1 | ||
| R902094197 | KORPUS | 1 | ||
| R902132714 | SWORZEŃ OBROTU | 4 | ||
| R909449670 | WIRNIK, OBROTY LEWE | 1 | ||
| R909921095 | SZTYFT GWINTOWANY | 2 | ||
| R909153328 | NAKRĘTKA USZCZELNIAJĄCAD | 2 | ||
| R909153364 | KOREK GWINTOWANYD | 4 | ||
| R909831387 | ŚRUBA Z ŁBEM WALCOWYM | 4 | ||
| R909831133 | O-RINGD | 1 | ||
| R909153861 | KOREK GWINTOWANYD | 2 | ||
| R913016375 | KOŁEK SPRĘŻYNUJĄCY | 2 | ||
| R909151259 | PIERŚCIEŃ ZABEZPIECZAJĄCY | 2 | ||
| R902123558 | ZAWÓR KIERUNKOWY Assembly parts list →L | 1 | ||
| 98 | R902095613 | ZESTAW USZCZELNIEŃ | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar | A11V |
| Operating mode | Pump, open circuit with charge pump | LO |
| Size (NG) | 260 | 260 |
| Control device | Electrical control with proportional solenoid with pressure cut-off | EP2D |
| Index | Size 145 … 260 | 1 |
| Direction of rotation | Viewed on drive shaft counter-clockwise | L |
| Sealing material | NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) | N |
| Drive shaft | Splined shaft DIN 5480 for single and combination pump | Z |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Working port | SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 | 12 |
| Through drive | 101-2 (B) 1 in 15T 16/32DP B-B | K04 |
| Swivel angle indicator | With BODAS Hall effect angle or linear position sensor PAL, ratiometric tension U = 5 VDC | H |
| Standard/special version | Special version | S |