Unit · AXIAL-PISTON PUMP
AA11VO95DRS/10R-NSD62K17R902064128
Axial piston pump Bosch Rexroth series A11VO, type code AA11VO95DRS/10R-NSD62K17, material number R902064128. Nominal size: NG 95. Axial piston unit: swashplate design, variable, nominal pressure 5100 psi (350 bar), maximum pressure 5800 psi (A11V). Operating mode: pump, open circuit without charge pump (O). Control device: pressure controller with load-sensing (DRS). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Drive shaft: splined shaft ANSI B92.1a‒1976 for single pump (S). Mounting flange: SAE J744 ‒ 4-hole (D). Working port: SAE pressure and suction port at side, opposite, UNC fastening thread. Port thread, UNF with profile sealing ring based on ISO 11926 (62). Through drive: 152-4 (D) 1 3/4 in 13T 8/16DP D (K17).
- Number
- R902064128
- Type code
- AA11VO95DRS/10R-NSD62K17
- Group
- A11VO 95
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902041921 | ROTARY GROUP Assembly parts list →L | 1 | |
| 2 | R902087682 | CONNECTION PLATE, RL Assembly parts list →L | 1 | |
| 3 | R909600081 | REGULATOR Assembly parts list →L | 1 | |
| 4 | R909607434 | CONTROL Assembly parts list →L | 1 | |
| 5 | R909607435 | CONTROL Assembly parts list →L | 1 | |
| 7 | R909613504 | BELL HOUSING Assembly parts list →L | 1 | |
| 10 | R902089437 | HOUSING | 1 | |
| 11 | R902132714 | PIVOT PIN | 4 | |
| 20 | R909449078 | SETSCREW | 2 | |
| 22 | R909152426 | SEALING NUTD | 2 | |
| 24 | R909153364 | SCREW PLUGD | 4 | |
| 25 | R909830782 | SOCKET HEAD CAP SCREW | 4 | |
| 26 | R909087781 | O-RINGD | 1 | |
| 27 | R909154480 | SCREW PLUG | 1 | |
| 28 | R913016373 | SLOTTED SPRING PIN | 2 | |
| 40 | R909153371 | SCREW PLUG | 1 | |
| 98 | R902095607 | SEAL KIT | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 5100 psi (350 bar), maximum pressure 5800 psi | A11V |
| Operating mode | Pump, open circuit without charge pump | O |
| Size (NG) | 95 | 95 |
| Control device | Pressure controller with load-sensing | DRS |
| Index | Size 40 … 130 | 0 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) | N |
| Drive shaft | Splined shaft ANSI B92.1a‒1976 for single pump | S |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Working port | SAE pressure and suction port at side, opposite, UNC fastening thread. Port thread, UNF with profile sealing ring based on ISO 11926 | 62 |
| Through drive | 152-4 (D) 1 3/4 in 13T 8/16DP D | K17 |