Unit · SILNIK TŁOKOWY OSIOWY
A6VM80EP2D/63W-VZB010HBR902075167
Axial piston motor Bosch Rexroth series A6VM, type code A6VM80EP2D/63W-VZB010HB, material number R902075167. Nominal size: NG 80. Axial piston unit: bent-axis design, variable (A6V). Operating mode: motor (M). Control device: proportional control, electric (with HIRSCHMANN connector – without suppressor diode) U = 24 V (EP2). Pressure control (only for HD and EP): pressure control Fixed setting (D). Direction of rotation: viewed on drive shaft variable (W). Sealing material: FKM (fluoroelastomer) (V). Drive shaft: splined shaft DIN 5480 (Z). Mounting flange: ISO 3019-2 4-hole (B). Working port: SAE working ports Without valve 0 A and B at rear 01 (010). Beginning of control: at Vg max (standard for HD, HZ, EP, EZ, DA) (B).
- Number
- R902075167
- Type code
- A6VM80EP2D/63W-VZB010HB
- Group
- A6VM 80
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R909603778 | MECHANIZM NAPĘDOWY Assembly parts list →L | 1 | ||
| R902075169 | STEROWANIE Assembly parts list →L | 1 | ||
| R909921417 | KORPUS | 1 | ||
| R909156651 | KOREK GWINTOWANYD | 1 | ||
| R909083412 | PIERŚCIEŃ ZABEZPIECZAJĄCY | 1 | ||
| R909831178 | PIERŚCIEŃ USZCZELNIAJĄCY WAŁUD | 1 | ||
| R909087188 | PIERŚCIEŃ PODPOROWYD | 1 | ||
| R909156591 | O-RINGD | 1 | ||
| R909156651 | KOREK GWINTOWANYD | 1 | ||
| R909446862 | SZTYFT GWINTOWANY Assembly parts list →L | 2 | ||
| R909152459 | NAKRĘTKA USZCZELNIAJĄCAD | 2 | ||
| 98 | R902002303 | ZESTAW USZCZELNIEŃ | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Bent-axis design, variable | A6V |
| Operating mode | Motor | M |
| Size (NG) | 80 | 80 |
| Control device | Proportional control, electric (with HIRSCHMANN connector – without suppressor diode) U = 24 V | EP2 |
| Pressure control (only for HD and EP) | Pressure control Fixed setting | D |
| Series | Series 6, index 3 | 63 |
| Direction of rotation | Viewed on drive shaft variable | W |
| Sealing material | FKM (fluoroelastomer) | V |
| Drive shaft | Splined shaft DIN 5480 | Z |
| Mounting flange | ISO 3019-2 4-hole | B |
| Working port | SAE working ports Without valve 0 A and B at rear 01 | 010 |
| Beginning of control | At Vg max (standard for HD, HZ, EP, EZ, DA) | B |