Unit · AXIAL-PISTON PUMP
A11VO260LRS/11L-NPD12K17R902076733
Axial piston pump Bosch Rexroth series A11VO, type code A11VO260LRS/11L-NPD12K17, material number R902076733. Nominal size: NG 260. Axial piston unit: swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar (A11V). Operating mode: pump, open circuit without charge pump (O). Control device: power controller fixed setting, with load-sensing (LRS). Direction of rotation: viewed on drive shaft counter-clockwise (L). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Drive shaft: parallel keyed shaft DIN 6885 (P). Mounting flange: SAE J744 ‒ 4-hole (D). Working port: SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 (12). Through drive: 152-4 (D) 1 3/4 in 13T 8/16DP D (K17).
- Number
- R902076733
- Type code
- A11VO260LRS/11L-NPD12K17
- Group
- A11VO 260
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902031477 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R909608347 | CONNECTION PLATE, LL Assembly parts list →L | 1 | ||
| R909446447 | REGULATOR Assembly parts list →L | 1 | ||
| R909600261 | CONTROL Assembly parts list →L | 1 | ||
| R909600262 | CONTROL Assembly parts list →L | 1 | ||
| R902026650 | BELL HOUSING Assembly parts list →L | 1 | ||
| R902094197 | HOUSING | 1 | ||
| R902132714 | PIVOT PIN | 4 | ||
| R909921095 | SETSCREW | 2 | ||
| R909153328 | SEALING NUTD | 2 | ||
| R909153364 | SCREW PLUGD | 4 | ||
| R909831387 | SOCKET HEAD CAP SCREW | 4 | ||
| R909831133 | O-RINGD | 1 | ||
| R909153861 | SCREW PLUGD | 2 | ||
| R913016375 | SLOTTED SPRING PIN | 2 | ||
| R909151979 | SCREW PLUG | 1 | ||
| 98 | R902095614 | SEAL KIT | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar | A11V |
| Operating mode | Pump, open circuit without charge pump | O |
| Size (NG) | 260 | 260 |
| Control device | Power controller fixed setting, with load-sensing | LRS |
| Index | Size 145 … 260 | 1 |
| Direction of rotation | Viewed on drive shaft counter-clockwise | L |
| Sealing material | NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) | N |
| Drive shaft | Parallel keyed shaft DIN 6885 | P |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Working port | SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 | 12 |
| Through drive | 152-4 (D) 1 3/4 in 13T 8/16DP D | K17 |