Unit · AXIAL-PISTON PUMP
A11VO95LRSU2/10R-NSD12K01HR902079257
Axial piston pump Bosch Rexroth series A11VO, type code A11VO95LRSU2/10R-NSD12K01H, material number R902079257. Nominal size: NG 95. Axial piston unit: swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar (A11V). Operating mode: pump, open circuit without charge pump (O). Control device: power controller fixed setting, with load-sensing, with electric stroke limiter positive control U = 24 V (LRSU2). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Drive shaft: splined shaft ANSI B92.1a‒1976 for single pump (S). Mounting flange: SAE J744 ‒ 4-hole (D). Working port: SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 (12). Through drive: 82-2 (A) 5/8 in 9T 16/32DP A (K01). Swivel angle indicator: with BODAS Hall effect angle or linear position sensor PAL, ratiometric tension U = 5 VDC (H).
- Number
- R902079257
- Type code
- A11VO95LRSU2/10R-NSD12K01H
- Group
- A11VO 95
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902041921 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R909607411 | CONNECTION PLATE, RL Assembly parts list →L | 1 | ||
| R902064767 | REGULATOR Assembly parts list →L | 1 | ||
| R909602645 | CONTROL Assembly parts list →L | 1 | ||
| 5 | R909607435 | CONTROL Assembly parts list →L | 1 | |
| R909442921 | BELL HOUSING Assembly parts list →L | 1 | ||
| R902089436 | HOUSING | 1 | ||
| 11 | R902132714 | PIVOT PIN | 4 | |
| R909449078 | SETSCREW | 2 | ||
| R909152426 | SEALING NUTD | 2 | ||
| R909153364 | SCREW PLUGD | 4 | ||
| R909830782 | SOCKET HEAD CAP SCREW | 4 | ||
| R909087781 | O-RINGD | 1 | ||
| R909153891 | SCREW PLUGD | 2 | ||
| R913016373 | SLOTTED SPRING PIN | 2 | ||
| R902123558 | SHUTTLE VALVE Assembly parts list →L | 1 | ||
| 98 | R902095608 | SEAL KIT | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar | A11V |
| Operating mode | Pump, open circuit without charge pump | O |
| Size (NG) | 95 | 95 |
| Control device | Power controller fixed setting, with load-sensing, with electric stroke limiter positive control U = 24 V | LRSU2 |
| Index | Size 40 … 130 | 0 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) | N |
| Drive shaft | Splined shaft ANSI B92.1a‒1976 for single pump | S |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Working port | SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 | 12 |
| Through drive | 82-2 (A) 5/8 in 9T 16/32DP A | K01 |
| Swivel angle indicator | With BODAS Hall effect angle or linear position sensor PAL, ratiometric tension U = 5 VDC | H |