Unit · AXIAL-PISTON PUMP
A4VG145DG100E00/40AL-ND6T11K00003E00R902086275
Axial piston pump Bosch Rexroth series A4VG, type code A4VG145DG100E00/40AL-ND6T11K00003E00, material number R902086275. Nominal size: NG 145. Axial piston unit: swashplate design, variable, nominal pressure 450 bar, maximum pressure 500 bar (A4V). Operating mode: pump, closed circuit (G). Pressure cut-off: without pressure cut-off without bypass (0). Connector for solenoids: without connector (only for purely hydraulic control) (0). Additional function: without additional function (0). DA control valve (only for NG110 and 125): without DA control valve (0). Direction of rotation: viewed on drive shaft counter-clockwise (L). Sealing material: NBR (nitrile rubber), shaft seal in FKM (fluoroelastomer) (N). Mounting flange: SAE J744 152-2/4 (D6). Drive shaft: splined shaft ANSI B92.1a–1976 1 3/4 in 13T 8/16DP (T1). Working port: SAE working port A and B, on left side (45° left) (1). Through drive: without through drive (0000). Filtration boost circuit/external boost pressure supply: external boost pressure supply (on version without integrated boost pump) (E). Pressure sensor: without pressure sensor (0).
- Number
- R902086275
- Type code
- A4VG145DG100E00/40AL-ND6T11K00003E00
- Group
- A4VG 145
- Edition
- 01/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902105908 | ROTARY GROUP Assembly parts list →L | 1 | |
| 2 | R902086321 | CONTROL Assembly parts list →L | 1 | |
| 3 | R902086277 | PUMP HOUSING Assembly parts list →L | 1 | |
| 4 | R902086278 | PUMP COVER Assembly parts list →L | 1 | |
| 6 | R902103102 | BEARING FLANGE Assembly parts list →L | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 450 bar, maximum pressure 500 bar | A4V |
| Operating mode | Pump, closed circuit | G |
| Size (NG) | 145 | 145 |
| Pressure cut-off | Without pressure cut-off without bypass | 0 |
| Connector for solenoids | Without connector (only for purely hydraulic control) | 0 |
| Additional function | Without additional function | 0 |
| DA control valve (only for NG110 and 125) | Without DA control valve | 0 |
| Direction of rotation | Viewed on drive shaft counter-clockwise | L |
| Sealing material | NBR (nitrile rubber), shaft seal in FKM (fluoroelastomer) | N |
| Mounting flange | SAE J744 152-2/4 | D6 |
| Drive shaft | Splined shaft ANSI B92.1a–1976 1 3/4 in 13T 8/16DP | T1 |
| Working port | SAE working port A and B, on left side (45° left) | 1 |
| Through drive | Without through drive | 0000 |
| Filtration boost circuit/external boost pressure supply | External boost pressure supply (on version without integrated boost pump) | E |
| Pressure sensor | Without pressure sensor | 0 |
| Other sensors | Without sensor | 0 |