Unit · AXIAL-PISTON PUMP
AA11VLO145DRS/11L-NXDXXKXX-SR902087509
Axial piston pump Bosch Rexroth series A11VO, type code AA11VLO145DRS/11L-NXDXXKXX-S, material number R902087509. Nominal size: NG 145. Axial piston unit: swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar (A11V). Operating mode: pump, open circuit with charge pump (LO). Control device: pressure controller with load-sensing (DRS). Direction of rotation: viewed on drive shaft counter-clockwise (L). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Mounting flange: SAE J744 ‒ 4-hole (D). Standard/special version: special version (S).
- Number
- R902087509
- Type code
- AA11VLO145DRS/11L-NXDXXKXX-S
- Group
- A11VLO 145
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902087485 | ROTARY GROUP Assembly parts list →L | 1 | |
| 2 | R902088080 | CONNECTION PLATE, LL Assembly parts list →L | 1 | |
| 3 | R909600081 | REGULATOR Assembly parts list →L | 1 | |
| 4 | R909601774 | CONTROL Assembly parts list →L | 1 | |
| 5 | R909601775 | CONTROL Assembly parts list →L | 1 | |
| 7 | R902087607 | BELL HOUSING Assembly parts list →L | 1 | |
| 10 | R902117353 | HOUSING | 1 | |
| 11 | R902132714 | PIVOT PIN | 4 | |
| 12 | R909921290 | IMPELLER, LEFT-HAND ROTATATION | 1 | |
| 20 | R909449078 | SETSCREW | 2 | |
| 22 | R909152426 | SEALING NUTD | 2 | |
| 24 | R909153364 | SCREW PLUGD | 4 | |
| 25 | R909830782 | SOCKET HEAD CAP SCREW | 4 | |
| 26 | R909083835 | O-RINGD | 1 | |
| 27 | R909154480 | SCREW PLUGD | 2 | |
| 28 | R913016373 | SLOTTED SPRING PIN | 2 | |
| 29 | R909083360 | RETAINING RING | 2 | |
| 40 | R909153371 | SCREW PLUGD | 1 | |
| 41 | R902600612 | BLEEDER VALVED | 2 | |
| 98 | R902095609 | SEAL KIT | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar | A11V |
| Operating mode | Pump, open circuit with charge pump | LO |
| Size (NG) | 145 | 145 |
| Control device | Pressure controller with load-sensing | DRS |
| Index | Size 145 … 260 | 1 |
| Direction of rotation | Viewed on drive shaft counter-clockwise | L |
| Sealing material | NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) | N |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Standard/special version | Special version | S |