Unit · AXIAL-PISTON MOTOR
AA6VM107HA1T/63W-VSD517A-ER902092367
Axial piston motor Bosch Rexroth series A6VM, type code AA6VM107HA1T/63W-VSD517A-E, material number R902092367. Axial piston unit: bent-axis design, variable (AA6V). Operating mode: motor (M). Control device: automatic control, high-pressure related with minimum pressure increase Δp ≤ approx. 145 psi (10 bar) (HA1). Override (only for HA): override, hydraulic, remote controlled, proportional (T). Direction of rotation: viewed on drive shaft bidirectional (W). Sealing material: FKM (fluoroelastomer) (V). Drive shaft: splined shaft ANSI B92.1a (S). Mounting flange: SAE J744 - 4-bolt 165-4 (D). Working port: SAE working ports A and B at rear Flushing and boost-pressure valve, mounted 7 (517). Beginning of control: at Vg min (standard for HA) (A).
- Number
- R902092367
- Type code
- AA6VM107HA1T/63W-VSD517A-E
- Group
- A6VM 107
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R909604151 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R902070732 | CONTROL Assembly parts list →L | 1 | ||
| 5 | R909921651 | HOUSING | 1 | |
| R910967343 | SCREW PLUGD | 1 | ||
| R909083415 | RETAINING RING | 1 | ||
| R909831662 | ROTARY SHAFT LIP SEALD | 1 | ||
| R909087019 | SUPPORTING DISCD | 1 | ||
| R902261576 | SEAL RINGD | 1 | ||
| R910967351 | SCREW PLUG | 1 | ||
| R909446862 | SETSCREW Assembly parts list →L | 2 | ||
| R909152459 | SEALING NUTD | 2 | ||
| 98 | R902002300 | SEAL KIT | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Bent-axis design, variable | AA6V |
| Operating mode | Motor | M |
| Control device | Automatic control, high-pressure related with minimum pressure increase Δp ≤ approx. 145 psi (10 bar) | HA1 |
| Override (only for HA) | Override, hydraulic, remote controlled, proportional | T |
| Series | Series 6, index 3 | 63 |
| Direction of rotation | Viewed on drive shaft bidirectional | W |
| Sealing material | FKM (fluoroelastomer) | V |
| Drive shaft | Splined shaft ANSI B92.1a | S |
| Mounting flange | SAE J744 - 4-bolt 165-4 | D |
| Working port | SAE working ports A and B at rear Flushing and boost-pressure valve, mounted 7 | 517 |
| Beginning of control | At Vg min (standard for HA) | A |