Unit · AXIAL-PISTON PUMP
A11VLO260DRG/11L-NZD12K82R-SR902097273
Axial piston pump Bosch Rexroth series A11VO, type code A11VLO260DRG/11L-NZD12K82R-S, material number R902097273. Nominal size: NG 260. Axial piston unit: swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar (A11V). Operating mode: pump, open circuit with charge pump (LO). Control device: pressure controller hydraulic remote controlled (DRG). Direction of rotation: viewed on drive shaft counter-clockwise (L). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Drive shaft: splined shaft DIN 5480 for single and combination pump (Z). Mounting flange: SAE J744 ‒ 4-hole (D). Working port: SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 (12). Through drive: 152-4 (D) W 45 × 2 × 21 × 9g (K82). Swivel angle indicator: with electric swivel angle sensor (R). Standard/special version: special version (S).
- Number
- R902097273
- Type code
- A11VLO260DRG/11L-NZD12K82R-S
- Group
- A11VLO 260
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902051414 | ROTARY GROUP Assembly parts list →L | 1 | |
| 2 | R909600264 | CONNECTION PLATE, LL Assembly parts list →L | 1 | |
| 3 | R909442208 | REGULATOR Assembly parts list →L | 1 | |
| 4 | R902007015 | CONTROL Assembly parts list →L | 1 | |
| 5 | R909600262 | CONTROL Assembly parts list →L | 1 | |
| 7 | R909613717 | BELL HOUSING Assembly parts list →L | 1 | |
| 8 | R902058983 | SWIVEL ANGLE SENSOR Assembly parts list →L | 1 | |
| 10 | R902094193 | HOUSING | 1 | |
| 11 | R902132714 | PIVOT PIN | 4 | |
| 12 | R909449670 | IMPELLER, LEFT-HAND ROTATATION | 1 | |
| 20 | R909921095 | SETSCREW | 2 | |
| 22 | R909153328 | SEALING NUTD | 2 | |
| 24 | R909153364 | SCREW PLUGD | 4 | |
| 25 | R909831387 | SOCKET HEAD CAP SCREW | 4 | |
| 26 | R909831133 | O-RINGD | 1 | |
| 27 | R909153861 | SCREW PLUGD | 2 | |
| 28 | R913016375 | SLOTTED SPRING PIN | 2 | |
| 29 | R909151259 | RETAINING RING | 2 | |
| 40 | R909151979 | SCREW PLUG | 1 | |
| 81 | R902602132 | SOCKET | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar | A11V |
| Operating mode | Pump, open circuit with charge pump | LO |
| Size (NG) | 260 | 260 |
| Control device | Pressure controller hydraulic remote controlled | DRG |
| Index | Size 145 … 260 | 1 |
| Direction of rotation | Viewed on drive shaft counter-clockwise | L |
| Sealing material | NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) | N |
| Drive shaft | Splined shaft DIN 5480 for single and combination pump | Z |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Working port | SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 | 12 |
| Through drive | 152-4 (D) W 45 × 2 × 21 × 9g | K82 |
| Swivel angle indicator | With electric swivel angle sensor | R |
| Standard/special version | Special version | S |