Unit · AXIAL-PISTON PUMP
A11VLO130EP2D/10L-NSD12K02P-S+AZPG-22R902106187
Axial piston pump Bosch Rexroth series A11VO, type code A11VLO130EP2D/10L-NSD12K02P-S+AZPG-22, material number R902106187. Nominal size: NG 130. Axial piston unit: swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar (A11V). Operating mode: pump, open circuit with charge pump (LO). Control device: electrical control with proportional solenoid with pressure cut-off (EP2D). Direction of rotation: viewed on drive shaft counter-clockwise (L). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Drive shaft: splined shaft ANSI B92.1a‒1976 for single pump (S). Mounting flange: SAE J744 ‒ 4-hole (D). Working port: SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 (12). Through drive: 101-2 (B) 7/8 in 13T 16/32DP B (K02). Connector for solenoids: DEUTSCH connector molded 2-pin, without suppressor diode (P). Standard/special version: special version (S).
- Number
- R902106187
- Type code
- A11VLO130EP2D/10L-NSD12K02P-S+AZPG-22
- Group
- A11VLO 130
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902106226 | AXIAL-PISTON PUMP Assembly parts list →L | 1 | ||
| 6 | 0510725473 | HYDRAULIC GEAR PUMPL | 1 | |
| R909083087 | SOCKET HEAD CAP SCREW | 2 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar | A11V |
| Operating mode | Pump, open circuit with charge pump | LO |
| Size (NG) | 130 | 130 |
| Control device | Electrical control with proportional solenoid with pressure cut-off | EP2D |
| Index | Size 40 … 130 | 0 |
| Direction of rotation | Viewed on drive shaft counter-clockwise | L |
| Sealing material | NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) | N |
| Drive shaft | Splined shaft ANSI B92.1a‒1976 for single pump | S |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Working port | SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 | 12 |
| Through drive | 101-2 (B) 7/8 in 13T 16/32DP B | K02 |
| Connector for solenoids | DEUTSCH connector molded 2-pin, without suppressor diode | P |
| Standard/special version | Special version | S |