Unit · AXIAL-PISTON PUMP
A11VO40HD2D/10L-NZC12K04-SR902112798
Axial piston pump Bosch Rexroth series A11VO, type code A11VO40HD2D/10L-NZC12K04-S, material number R902112798. Nominal size: NG 40. Axial piston unit: swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar (A11V). Operating mode: pump, open circuit without charge pump (O). Control device: hydraulic control, pilot-pressure related with pressure cut-off Δp = 25 bar (HD2D). Direction of rotation: viewed on drive shaft counter-clockwise (L). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Drive shaft: splined shaft DIN 5480 for single and combination pump (Z). Mounting flange: SAE J744 ‒ 2-hole (C). Working port: SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 (12). Through drive: 101-2 (B) 1 in 15T 16/32DP B-B (K04). Standard/special version: special version (S).
- Number
- R902112798
- Type code
- A11VO40HD2D/10L-NZC12K04-S
- Group
- A11VO 40
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902044524 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R909447202 | CONNECTION PLATE, LL Assembly parts list →L | 1 | ||
| R902112799 | REGULATOR Assembly parts list →L | 1 | ||
| R909446728 | CONTROL Assembly parts list →L | 1 | ||
| R909446729 | CONTROL Assembly parts list →L | 1 | ||
| R909607050 | BELL HOUSING Assembly parts list →L | 1 | ||
| R909445050 | HOUSING | 1 | ||
| R902132714 | PIVOT PIN | 2 | ||
| R909445857 | SETSCREW | 1 | ||
| R909449078 | SETSCREW | 1 | ||
| R909152426 | SEALING NUTD | 2 | ||
| R909153364 | SCREW PLUGD | 4 | ||
| R909831123 | SOCKET HEAD CAP SCREW | 4 | ||
| R902273575 | SEAL RINGD | 1 | ||
| R909151694 | SCREW PLUGD | 2 | ||
| R913016373 | SLOTTED SPRING PIN | 2 | ||
| R902123558 | SHUTTLE VALVE Assembly parts list →L | 1 | ||
| 98 | R902095601 | SEAL KIT | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar | A11V |
| Operating mode | Pump, open circuit without charge pump | O |
| Size (NG) | 40 | 40 |
| Control device | Hydraulic control, pilot-pressure related with pressure cut-off Δp = 25 bar | HD2D |
| Index | Size 40 … 130 | 0 |
| Direction of rotation | Viewed on drive shaft counter-clockwise | L |
| Sealing material | NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) | N |
| Drive shaft | Splined shaft DIN 5480 for single and combination pump | Z |
| Mounting flange | SAE J744 ‒ 2-hole | C |
| Working port | SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 | 12 |
| Through drive | 101-2 (B) 1 in 15T 16/32DP B-B | K04 |
| Standard/special version | Special version | S |