Unit · AXIAL-PISTON PUMP
AA10VG63DA1D8/10R-NSC63F013SQ-SKR902123936
Axial piston pump Bosch Rexroth series A10VG, type code AA10VG63DA1D8/10R-NSC63F013SQ-SK, material number R902123936. Nominal size: NG 63. Axial piston unit: swashplate design, variable, nominal pressure 4350 psi (300 bar), maximum pressure 5100 psi (AA10V). Operating mode: pump, closed circuit (G). Control device: automatic control speed-related (DA1). Pressure cut-off: pressure cut-off (D). DA control valve: DA control valve, fixed setting and hydraulic inch valve mounted, control with mineral oil-based hydraulic fluid (8). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: NBR (nitrile rubber), shaft seal made of FKM (flurocarbon rubber) (N). Drive shaft: splined shaft ANSI B92.1a–1976 for single pump (S). Mounting flange: SAE J744 2-hole (C). Boost pump: integrated boost pump with and without through drive (F). Through drive: flange SAE J744 Hub for splined shaft, 82-2 (A) 5/8 in 9T 16/32DP (01). High-pressure relief valve Setting range ∆pHD: high-pressure relief valve direct operated, 3600 … 4650 psi without bypass fixed setting (250 … 320 bar) (3). Filtration boost circuit/external boost pressure supply: filtration in the boost pump suction line (S). Connector for solenoids: DEUTSCH molded connector, 2-pin, DT04-2P with suppressor diode (only for EZ and DA switching solenoid) (Q).
- Number
- R902123936
- Type code
- AA10VG63DA1D8/10R-NSC63F013SQ-SK
- Group
- A10VG 63
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902123933 | AXIAL-PISTON PUMP Assembly parts list →L | 1 | ||
| 0510525073 | HYDRAULIC GEAR PUMPL | 1 | ||
| R902603028 | SOCKET HEAD CAP SCREW | 2 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 4350 psi (300 bar), maximum pressure 5100 psi | AA10V |
| Operating mode | Pump, closed circuit | G |
| Size (NG) | 63 | 63 |
| Control device | Automatic control speed-related | DA1 |
| Pressure cut-off | Pressure cut-off | D |
| DA control valve | DA control valve, fixed setting and hydraulic inch valve mounted, control with mineral oil-based hydraulic fluid | 8 |
| Series | Series 1, index 0 | 10 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | NBR (nitrile rubber), shaft seal made of FKM (flurocarbon rubber) | N |
| Drive shaft | Splined shaft ANSI B92.1a–1976 for single pump | S |
| Mounting flange | SAE J744 2-hole | C |
| Boost pump | Integrated boost pump with and without through drive | F |
| Through drive | Flange SAE J744 Hub for splined shaft, 82-2 (A) 5/8 in 9T 16/32DP | 01 |
| High-pressure relief valve Setting range ∆pHD | High-pressure relief valve direct operated, 3600 … 4650 psi without bypass fixed setting (250 … 320 bar) | 3 |
| Filtration boost circuit/external boost pressure supply | Filtration in the boost pump suction line | S |
| Connector for solenoids | DEUTSCH molded connector, 2-pin, DT04-2P with suppressor diode (only for EZ and DA switching solenoid) | Q |
| Standard/special version | Special version | -S |