Unit · AXIAL-PISTON MOTOR
A6VM55EP1D/63W-VZB027FPA-SR902124056
Axial piston motor Bosch Rexroth series A6VM, type code A6VM55EP1D/63W-VZB027FPA-S, material number R902124056. Nominal size: NG 55. Axial piston unit: bent-axis design, variable (A6V). Operating mode: motor (M). Control device: proportional control, electric (with HIRSCHMANN U = 12 V connector – without suppressor diode) (EP1). Pressure control (only for HD and EP): pressure control Fixed setting (D). Direction of rotation: viewed on drive shaft variable (W). Sealing material: FKM (fluoroelastomer) (V). Drive shaft: splined shaft DIN 5480 (Z). Mounting flange: ISO 3019-2 4-hole (B). Working port: SAE working ports A and B at side, opposite Flushing and boost-pressure valve, mounted 7 (027). Beginning of control: at Vg min (standard for HA) (A). Standard/special version: special version (-S).
- Number
- R902124056
- Type code
- A6VM55EP1D/63W-VZB027FPA-S
- Group
- A6VM 55
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R909604692 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R902126553 | CONTROL Assembly parts list →L | 1 | ||
| R902049345 | HOUSING | 1 | ||
| R909156651 | SCREW PLUGD | 1 | ||
| R909083408 | RETAINING RING | 1 | ||
| R909831179 | ROTARY SHAFT LIP SEALD | 1 | ||
| R909087079 | SUPPORTING DISCD | 1 | ||
| R902253125 | SEAL RINGD | 1 | ||
| R909447003 | SETSCREW Assembly parts list →L | 2 | ||
| R909152426 | SEALING NUTD | 2 | ||
| 98 | R902002302 | SEAL KIT | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Bent-axis design, variable | A6V |
| Operating mode | Motor | M |
| Size (NG) | 55 | 55 |
| Control device | Proportional control, electric (with HIRSCHMANN U = 12 V connector – without suppressor diode) | EP1 |
| Pressure control (only for HD and EP) | Pressure control Fixed setting | D |
| Series | Series 6, index 3 | 63 |
| Direction of rotation | Viewed on drive shaft variable | W |
| Sealing material | FKM (fluoroelastomer) | V |
| Drive shaft | Splined shaft DIN 5480 | Z |
| Mounting flange | ISO 3019-2 4-hole | B |
| Working port | SAE working ports A and B at side, opposite Flushing and boost-pressure valve, mounted 7 | 027 |
| Beginning of control | At Vg min (standard for HA) | A |
| Standard/special version | Special version | -S |