Unit · AXIAL-PISTON PUMP
AA11VLO260EP1G/11R-NTD62K24PR902137252
Axial piston pump Bosch Rexroth series A11VO, type code AA11VLO260EP1G/11R-NTD62K24P, material number R902137252. Nominal size: NG 260. Axial piston unit: swashplate design, variable, nominal pressure 5100 psi (350 bar), maximum pressure 5800 psi (A11V). Operating mode: pump, open circuit with charge pump (LO). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Drive shaft: splined shaft ANSI B92.1a‒1976 for combination pump (T). Mounting flange: SAE J744 ‒ 4-hole (D). Working port: SAE pressure and suction port at side, opposite, UNC fastening thread. Port thread, UNF with profile sealing ring based on ISO 11926 (62). Through drive: 127-2/-2+4 (C) 1 1/2 in 17T 12/24DP C-C (K24). Connector for solenoids: DEUTSCH connector molded 2-pin, without suppressor diode (P).
- Number
- R902137252
- Type code
- AA11VLO260EP1G/11R-NTD62K24P
- Group
- A11VLO 260
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902023761 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R902089565 | CONNECTION PLATE, RL Assembly parts list →L | 1 | ||
| R902137369 | REGULATOR Assembly parts list →L | 1 | ||
| R909600261 | CONTROL Assembly parts list →L | 1 | ||
| R909600262 | CONTROL Assembly parts list →L | 1 | ||
| R902137250 | BELL HOUSING Assembly parts list →L | 1 | ||
| R902094199 | HOUSING | 1 | ||
| R902132714 | PIVOT PIN | 4 | ||
| R909449416 | IMPELLER, RIGHT-HAND ROTATION | 1 | ||
| R909921095 | SETSCREW | 2 | ||
| R909153328 | SEALING NUTD | 2 | ||
| R909153364 | SCREW PLUGD | 4 | ||
| R909831387 | SOCKET HEAD CAP SCREW | 4 | ||
| R909831133 | O-RINGD | 1 | ||
| R909153378 | SCREW PLUGD | 2 | ||
| R913016375 | SLOTTED SPRING PIN | 2 | ||
| R909151259 | RETAINING RING | 2 | ||
| R902220058 | SHUTTLE VALVE Assembly parts list →L | 1 | ||
| 98 | R902095613 | SEAL KIT | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 5100 psi (350 bar), maximum pressure 5800 psi | A11V |
| Operating mode | Pump, open circuit with charge pump | LO |
| Size (NG) | 260 | 260 |
| Index | Size 145 … 260 | 1 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) | N |
| Drive shaft | Splined shaft ANSI B92.1a‒1976 for combination pump | T |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Working port | SAE pressure and suction port at side, opposite, UNC fastening thread. Port thread, UNF with profile sealing ring based on ISO 11926 | 62 |
| Through drive | 127-2/-2+4 (C) 1 1/2 in 17T 12/24DP C-C | K24 |
| Connector for solenoids | DEUTSCH connector molded 2-pin, without suppressor diode | P |