Unit · AXIAL-PISTON PUMP
A11VLO145LE2S/11L-NZD12K01PR902155881
Axial piston pump Bosch Rexroth series A11VO, type code A11VLO145LE2S/11L-NZD12K01P, material number R902155881. Nominal size: NG 145. Axial piston unit: swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar (A11V). Operating mode: pump, open circuit with charge pump (LO). Control device: with override electric negative control U = 24 V, with load-sensing (LE2S). Direction of rotation: viewed on drive shaft counter-clockwise (L). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Drive shaft: splined shaft DIN 5480 for single and combination pump (Z). Mounting flange: SAE J744 ‒ 4-hole (D). Working port: SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 (12). Through drive: 82-2 (A) 5/8 in 9T 16/32DP A (K01). Connector for solenoids: DEUTSCH connector molded 2-pin, without suppressor diode (P).
- Number
- R902155881
- Type code
- A11VLO145LE2S/11L-NZD12K01P
- Group
- A11VLO 145
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902068302 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R909606059 | CONNECTION PLATE, LL Assembly parts list →L | 1 | ||
| 3 | R902083662 | REGULATOR Assembly parts list →L | 1 | |
| R909601773 | CONTROL Assembly parts list →L | 1 | ||
| 5 | R909601775 | CONTROL Assembly parts list →L | 1 | |
| R909601128 | BELL HOUSING Assembly parts list →L | 1 | ||
| R902117356 | HOUSING | 1 | ||
| 11 | R902132714 | PIVOT PIN | 4 | |
| R909921290 | IMPELLER, LEFT-HAND ROTATATION | 1 | ||
| R909449078 | SETSCREW | 2 | ||
| R909152426 | SEALING NUTD | 2 | ||
| R909153364 | SCREW PLUGD | 4 | ||
| R909830782 | SOCKET HEAD CAP SCREW | 4 | ||
| R909083835 | O-RINGD | 1 | ||
| R909153891 | SCREW PLUG | 1 | ||
| R913016373 | SLOTTED SPRING PIN | 2 | ||
| R909083360 | RETAINING RING | 2 | ||
| R909151979 | SCREW PLUGD | 1 | ||
| 98 | R902095610 | SEAL KIT | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar | A11V |
| Operating mode | Pump, open circuit with charge pump | LO |
| Size (NG) | 145 | 145 |
| Control device | with override electric negative control U = 24 V, with load-sensing | LE2S |
| Index | Size 145 … 260 | 1 |
| Direction of rotation | Viewed on drive shaft counter-clockwise | L |
| Sealing material | NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) | N |
| Drive shaft | Splined shaft DIN 5480 for single and combination pump | Z |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Working port | SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 | 12 |
| Through drive | 82-2 (A) 5/8 in 9T 16/32DP A | K01 |
| Connector for solenoids | DEUTSCH connector molded 2-pin, without suppressor diode | P |