Unit · AXIAL-PISTON PUMP
A11VO260DRS/11L-XPD12K86-SR902159983
Axial piston pump Bosch Rexroth series A11VO, type code A11VO260DRS/11L-XPD12K86-S, material number R902159983. Nominal size: NG 260. Axial piston unit: swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar (A11V). Operating mode: pump, open circuit without charge pump (O). Control device: pressure controller with load-sensing (DRS). Direction of rotation: viewed on drive shaft counter-clockwise (L). Drive shaft: parallel keyed shaft DIN 6885 (P). Mounting flange: SAE J744 ‒ 4-hole (D). Working port: SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 (12). Through drive: 152-4 (D) 1 1/4in 14T 12/24DP C (K86). Standard/special version: special version (S).
- Number
- R902159983
- Type code
- A11VO260DRS/11L-XPD12K86-S
- Group
- A11VO 260
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902031477 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R902099852 | CONNECTION PLATE, LL Assembly parts list →L | 1 | ||
| R902192170 | REGULATOR Assembly parts list →L | 1 | ||
| R902007015 | CONTROL Assembly parts list →L | 1 | ||
| R909600262 | CONTROL Assembly parts list →L | 1 | ||
| R902159982 | BELL HOUSING Assembly parts list →L | 1 | ||
| R902094197 | HOUSING | 1 | ||
| R902132714 | PIVOT PIN | 4 | ||
| R909921095 | SETSCREW | 2 | ||
| R909153328 | SEALING NUTD | 2 | ||
| R909156649 | SCREW PLUGD | 4 | ||
| R909831387 | SOCKET HEAD CAP SCREW | 4 | ||
| R909831133 | O-RINGD | 1 | ||
| R909156652 | SCREW PLUGD | 2 | ||
| R913016375 | SLOTTED SPRING PIN | 2 | ||
| R909153930 | SCREW PLUG | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar | A11V |
| Operating mode | Pump, open circuit without charge pump | O |
| Size (NG) | 260 | 260 |
| Control device | Pressure controller with load-sensing | DRS |
| Index | Size 145 … 260 | 1 |
| Direction of rotation | Viewed on drive shaft counter-clockwise | L |
| Drive shaft | Parallel keyed shaft DIN 6885 | P |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Working port | SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 | 12 |
| Through drive | 152-4 (D) 1 1/4in 14T 12/24DP C | K86 |
| Standard/special version | Special version | S |