Unit · AXIAL-PISTON PUMP
A11VLO190LRDH5/11L-NZD12K04R902196449
Axial piston pump Bosch Rexroth series A11VO, type code A11VLO190LRDH5/11L-NZD12K04, material number R902196449. Nominal size: NG 190. Axial piston unit: swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar (A11V). Operating mode: pump, open circuit with charge pump (LO). Control device: power controller fixed setting, with pressure cut-off (LRD). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Drive shaft: splined shaft DIN 5480 for single and combination pump (Z). Mounting flange: SAE J744 ‒ 4-hole (D). Working port: SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 (12). Through drive: 101-2 (B) 1 in 15T 16/32DP B-B (K04).
- Number
- R902196449
- Type code
- A11VLO190LRDH5/11L-NZD12K04
- Group
- A11VLO 190
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902008557 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R902012263 | CONNECTION PLATE, LL Assembly parts list →L | 1 | ||
| R902041422 | REGULATOR Assembly parts list →L | 1 | ||
| R902007450 | CONTROL Assembly parts list →L | 1 | ||
| 5 | R902007456 | CONTROL Assembly parts list →L | 1 | |
| R902033820 | BELL HOUSING Assembly parts list →L | 1 | ||
| R902120458 | HOUSING | 1 | ||
| 11 | R902132714 | PIVOT PIN | 4 | |
| R909449867 | IMPELLER, LEFT-HAND ROTATATION | 1 | ||
| R909921095 | SETSCREW | 2 | ||
| R909153328 | SEALING NUTD | 2 | ||
| R909153364 | SCREW PLUGD | 4 | ||
| R909084762 | SOCKET HEAD CAP SCREW | 4 | ||
| R902601050 | O-RINGD | 1 | ||
| R909153861 | SCREW PLUG | 1 | ||
| R913016375 | SLOTTED SPRING PIN | 2 | ||
| R909083362 | RETAINING RING | 2 | ||
| R902123558 | SHUTTLE VALVE Assembly parts list →L | 1 | ||
| 98 | R902095612 | SEAL KIT | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar | A11V |
| Operating mode | Pump, open circuit with charge pump | LO |
| Size (NG) | 190 | 190 |
| Control device | Power controller fixed setting, with pressure cut-off | LRD |
| Index | Size 145 … 260 | 1 |
| Sealing material | NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) | N |
| Drive shaft | Splined shaft DIN 5480 for single and combination pump | Z |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Working port | SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 | 12 |
| Through drive | 101-2 (B) 1 in 15T 16/32DP B-B | K04 |