Unit · AXIAL-PISTON PUMP
A4VG125EP3DMT3R/32R-NSF02F071SRPR902197521
Axial piston pump Bosch Rexroth series A4VG, type code A4VG125EP3DMT3R/32R-NSF02F071SRP, material number R902197521. Nominal size: NG 125. Axial piston unit: swashplate design, variable, nominal pressure 400 bar, maximum pressure 450 bar (A4V). Operating mode: pump, closed circuit (G). Control device: proportional U = 12 V control electric with proportional solenoid (EP3). Pressure cut-off: pressure cut-off (D). Mechanical stroke limiter: mechanical stroke limiter, externally adjustable (M). Stroking chamber pressure port: stroking chamber pressure port X X (T). DA control valve: DA control valve, mechanically adjustable, direction of actuation, clockwise with position lever (3R). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: NBR (nitrile rubber), shaft seal made of FKM (fluorocarbon rubber) (N). Drive shaft: splined shaft for single pump ANSI B92.1a (S). Mounting flange: SAE J744 2+4-hole (F). Working port (port plate): SAE working port A and B, top and bottom suction port S bottom (02). Boost pump: integrated boost pump with and without through drive (F). Through drive: flange SAE J744 Hub for splined shaft, 127-2 (C) 1 1/4 in 14T 12/24DP (07).
- Number
- R902197521
- Type code
- A4VG125EP3DMT3R/32R-NSF02F071SRP
- Group
- A4VG 125
- Edition
- 03/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902199757 | ROTARY GROUP Assembly parts list →L | 1 | |
| 2 | R902018704 | CONTROL Assembly parts list →L | 1 | |
| 3 | R909609519 | CONNECTION PLATE Assembly parts list →L | 1 | |
| 4 | R902027760 | INTERNAL GEAR PUMP Assembly parts list →L | 1 | |
| 5 | R902113952 | CONTROL MODULE Assembly parts list →L | 1 | |
| 7 | R902188894 | CONTROL CARTRIDGE Assembly parts list →L | 1 | |
| 10 | R902085121 | HOUSING | 1 | |
| 13 | R902118633 | PIVOT PIN | 1 | |
| 20 | R909153861 | SCREW PLUGD | 2 | |
| 21 | R909153815 | SCREW PLUGD | 1 | |
| 22 | R909153816 | SCREW PLUGD | 3 | |
| 28 | R909426700 | NOZZLE | 2 | |
| 31 | R913016373 | SLOTTED SPRING PIN | 2 | |
| 32 | R909151692 | SCREW PLUGD | 6 | |
| 33 | R909153861 | SCREW PLUGD | 3 | |
| 35 | R909153364 | SCREW PLUGD | 2 | |
| 46 | R902035616 | ECCENTRIC SCREW | 1 | |
| 47 | R909087405 | SEALING NUTD | 1 | |
| 48 | R909151694 | SCREW PLUGD | 1 | |
| 49 | R909426707 | NOZZLE | 1 | |
| 83 | R902073064 | SWIVEL ANGLE SENSOR Assembly parts list →L | 1 | |
| 98 | R902095530 | SEAL KIT | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 400 bar, maximum pressure 450 bar | A4V |
| Operating mode | Pump, closed circuit | G |
| Size (NG) | 125 | 125 |
| Control device | Proportional U = 12 V control electric with proportional solenoid | EP3 |
| Pressure cut-off | Pressure cut-off | D |
| Mechanical stroke limiter | Mechanical stroke limiter, externally adjustable | M |
| Stroking chamber pressure port | Stroking chamber pressure port X X | T |
| DA control valve | DA control valve, mechanically adjustable, direction of actuation, clockwise with position lever | 3R |
| Series | Series 3, index 2 | 32 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | NBR (nitrile rubber), shaft seal made of FKM (fluorocarbon rubber) | N |
| Drive shaft | Splined shaft for single pump ANSI B92.1a | S |
| Mounting flange | SAE J744 2+4-hole | F |
| Working port (port plate) | SAE working port A and B, top and bottom suction port S bottom | 02 |
| Boost pump | Integrated boost pump with and without through drive | F |
| Through drive | Flange SAE J744 Hub for splined shaft, 127-2 (C) 1 1/4 in 14T 12/24DP | 07 |
| High-pressure relief valve Setting range ∆pHD | High-pressure relief valve, pilot operated 100 … 420 bar with bypass | 1 |
| Filtration boost circuit/external boost pressure supply | Filtration in the boost pump suction line | S |
| Swivel angle sensor | Electric swivel angle sensor mounted | R |
| Connector for solenoids | DEUTSCH connector without suppressor diode molded, 2-pin | P |