Unit · AXIAL-PISTON PUMP
A10VG63DA1DMT2/10L-NSC10K025EH-S+AZPNF-1R902198529
Axial piston pump Bosch Rexroth series A10VG, type code A10VG63DA1DMT2/10L-NSC10K025EH-S+AZPNF-1, material number R902198529. Nominal size: NG 63. Axial piston unit: swashplate design, variable, nominal pressure 300 bar, maximum pressure 350 bar (A10V). Operating mode: pump, closed circuit (G). Control device: automatic control U = 12 V speed-related (DA1). Pressure cut-off: pressure cut-off (D). Mechanical stroke limiter: mechanical stroke limiter, externally adjustable (M). Stroking chamber pressure port: stroking chamber pressure port X X (T). DA control valve for NG28... 63: DA control valve, fixed setting (2). Direction of rotation: viewed on drive shaft (L). Sealing material: NBR (nitrile rubber), shaft seal made of FKM (flurocarbon rubber) (N). Drive shaft: splined shaft ANSI B92.1a–1976 for single pump (S). Mounting flange: SAE J744 2-hole (C). Working port (port plate): SAE working port A and B, same side left suction port S bottom (10). Boost pump: without integrated boost pump with through drive (K). Through drive: flange SAE J744 hub for splined shaft, 101-2 (B) 7/8 in 13T 16/32DP (02).
- Number
- R902198529
- Type code
- A10VG63DA1DMT2/10L-NSC10K025EH-S+AZPNF-1
- Group
- A10VG 63
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902198531 | AXIAL-PISTON PUMP Assembly parts list →L | 1 | ||
| 0510765384 | HYDRAULIC GEAR PUMPL | 1 | ||
| R909083204 | SOCKET HEAD CAP SCREW | 2 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 300 bar, maximum pressure 350 bar | A10V |
| Operating mode | Pump, closed circuit | G |
| Size (NG) | 63 | 63 |
| Control device | Automatic control U = 12 V speed-related | DA1 |
| Pressure cut-off | Pressure cut-off | D |
| Mechanical stroke limiter | Mechanical stroke limiter, externally adjustable | M |
| Stroking chamber pressure port | Stroking chamber pressure port X X | T |
| DA control valve for NG28... 63 | DA control valve, fixed setting | 2 |
| Series | Series 1, index 0 | 10 |
| Direction of rotation | Viewed on drive shaft | L |
| Sealing material | NBR (nitrile rubber), shaft seal made of FKM (flurocarbon rubber) | N |
| Drive shaft | Splined shaft ANSI B92.1a–1976 for single pump | S |
| Mounting flange | SAE J744 2-hole | C |
| Working port (port plate) | SAE working port A and B, same side left suction port S bottom | 10 |
| Boost pump | Without integrated boost pump with through drive | K |
| Through drive | Flange SAE J744 hub for splined shaft, 101-2 (B) 7/8 in 13T 16/32DP | 02 |
| High-pressure relief valve Setting range ∆pHD | High-pressure relief valve direct operated, 250 … 320 bar fixed setting with bypass | 5 |
| Filtration boost circuit/external boost pressure supply | External boost pressure supply (on version without integrated boost pump N and K) | E |
| Standard/special version | Special version | -S |