Unit · AXIAL-PISTON PUMP
A18VO080EP1P0/11NLWK0E810-0 77722.3256R902202001
Axial piston pump Bosch Rexroth series A18VO, type code A18VO080EP1P0/11NLWK0E810-077722.3256, material number R902202001. Nominal size: NG 80. Axial piston unit: bent-axis design, variable, nominal pressure 350 bar, maximum pressure 400 bar, for commercial vehicles (trucks) (A18V). Operating mode: pump, open circuit (O). Control devices: proportional control, electric positive control U = 12 V (EP1). Connector for solenoids: DEUTSCH molded connector, 2-pin – without suppressor diode (P). Auxiliary functions 1: without auxiliary functions (0). Design of ports and fastening threads: volumetric ports according to DIN 3852 with profile seal, volumetric fastening thread according to DIN 13 (N). Direction of rotation: viewed on drive shaft counter-clockwise (L). Sealing material: FKM (fluoroelastomer) including the 2 shaft seal rings in FKM (W). Mounting flange: special flange ISO 7653-1985 (for trucks) (K0). Drive shaft: splined shaft similar to DIN ISO 14 (for trucks) (E8). Working port: threaded ports A and S at rear (1). Speed sensor: without speed sensor (0). Standard / special version: standard version (0).
- Number
- R902202001
- Type code
- A18VO080EP1P0/11NLWK0E810-0 77722.3256
- Group
- AXIAL-PISTON PUMP
- Edition
- 05/2023
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902124301 | HOUSING Assembly parts list →L | 1 | |
| 2 | R902126628 | ROTARY GROUP Assembly parts list →L | 1 | |
| 3 | R902158879 | COVER PLATE Assembly parts list →L | 1 | |
| 4 | R902200213 | CONTROL PART Assembly parts list →L | 1 | |
| 5 | R902149435 | COVER Assembly parts list →L | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Bent-axis design, variable, nominal pressure 350 bar, maximum pressure 400 bar, for commercial vehicles (trucks) | A18V |
| Operating mode | Pump, open circuit | O |
| Sizes (NG) | 80 | 080 |
| Control devices | Proportional control, electric positive control U = 12 V | EP1 |
| Connector for solenoids | DEUTSCH molded connector, 2-pin – without suppressor diode | P |
| Auxiliary functions 1 | Without auxiliary functions | 0 |
| Series | Series 1, Index 1 | 11 |
| Design of ports and fastening threads | Volumetric ports according to DIN 3852 with profile seal, volumetric fastening thread according to DIN 13 | N |
| Direction of rotation | Viewed on drive shaft counter-clockwise | L |
| Sealing material | FKM (fluoroelastomer) including the 2 shaft seal rings in FKM | W |
| Mounting flange | Special flange ISO 7653-1985 (for trucks) | K0 |
| Drive shaft | Splined shaft similar to DIN ISO 14 (for trucks) | E8 |
| Working port | Threaded ports A and S at rear | 1 |
| Speed sensor | Without speed sensor | 0 |
| Standard / special version | Standard version | 0 |