Unit · AXIAL-PISTON PUMP
A10VG28EP3D1/10L-NSC13K013EP-SR902203171
Axial piston pump Bosch Rexroth series A10VG, type code A10VG28EP3D1/10L-NSC13K013EP-S, material number R902203171. Nominal size: NG 28. Axial piston unit: swashplate design, variable, nominal pressure 300 bar, maximum pressure 350 bar (A10V). Operating mode: pump, closed circuit (G). Control device: proportional control, electric U = 12 V with proportional solenoid with inlet filtration in (EP3). Pressure cut-off: pressure cut-off (D). DA control valve for NG28... 63: without DA control valve (1). Direction of rotation: viewed on drive shaft (L). Sealing material: NBR (nitrile rubber), shaft seal made of FKM (flurocarbon rubber) (N). Drive shaft: splined shaft ANSI B92.1a–1976 for single pump (S). Mounting flange: SAE J744 2-hole (C). Working port (port plate): SAE working port A and B, same side right suction port S at top (externally piped up (13). Boost pump: without integrated boost pump with through drive (K). Through drive: flange SAE J744 hub for splined shaft, 82-2 (A) 5/8 in 9T 16/32DP (01). High-pressure relief valve Setting range ∆pHD: high-pressure relief valve direct operated, 250 … 320 bar without bypass fixed setting (3). Filtration boost circuit/external boost pressure supply: external boost pressure supply (on version without integrated boost pump N and K) (E).
- Number
- R902203171
- Type code
- A10VG28EP3D1/10L-NSC13K013EP-S
- Group
- A10VG 28
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902102119 | ROTARY GROUP Assembly parts list →L | 1 | |
| 2 | R902017520 | CONTROL Assembly parts list →L | 1 | |
| 3 | R902204030 | CONNECTION PLATE Assembly parts list →L | 1 | |
| 4 | R902246733 | BELL HOUSING Assembly parts list →L | 1 | |
| 5 | R902128599 | CONTROL MODULE Assembly parts list →L | 1 | |
| 8 | R902280102 | HYDRAULIC LINE Assembly parts list →L | 1 | |
| 10 | R902010631 | HOUSING | 1 | |
| 13 | R902114380 | PIVOT PIN | 1 | |
| 14 | R913009665 | STRAIGHT PIN | 1 | |
| 20 | R909151694 | SCREW PLUGD | 1 | |
| 22 | R909151692 | SCREW PLUGD | 3 | |
| 23 | R909153815 | SCREW PLUG | 1 | |
| 24 | R909153364 | SCREW PLUGD | 1 | |
| 25 | R909153861 | SCREW PLUG | 1 | |
| 27 | R909831318 | DOUBLE BREAK-OFF PLUG | 1 | |
| 28 | R909156493 | NOZZLE | 2 | |
| 31 | R913016373 | SLOTTED SPRING PIN | 2 | |
| 41 | R909086547 | O-RINGD | 1 | |
| 49 | R909156496 | NOZZLE | 1 | |
| 98 | R902095560 | SEAL KIT | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 300 bar, maximum pressure 350 bar | A10V |
| Operating mode | Pump, closed circuit | G |
| Size (NG) | 28 | 28 |
| Control device | Proportional control, electric U = 12 V with proportional solenoid with inlet filtration in | EP3 |
| Pressure cut-off | Pressure cut-off | D |
| DA control valve for NG28... 63 | Without DA control valve | 1 |
| Series | Series 1, index 0 | 10 |
| Direction of rotation | Viewed on drive shaft | L |
| Sealing material | NBR (nitrile rubber), shaft seal made of FKM (flurocarbon rubber) | N |
| Drive shaft | Splined shaft ANSI B92.1a–1976 for single pump | S |
| Mounting flange | SAE J744 2-hole | C |
| Working port (port plate) | SAE working port A and B, same side right suction port S at top (externally piped up | 13 |
| Boost pump | Without integrated boost pump with through drive | K |
| Through drive | Flange SAE J744 hub for splined shaft, 82-2 (A) 5/8 in 9T 16/32DP | 01 |
| High-pressure relief valve Setting range ∆pHD | High-pressure relief valve direct operated, 250 … 320 bar without bypass fixed setting | 3 |
| Filtration boost circuit/external boost pressure supply | External boost pressure supply (on version without integrated boost pump N and K) | E |
| Connector for solenoids | DEUTSCH molded connector, 2-pin, without suppressor diode DT04-2P | P |
| Standard/special version | Special version | -S |