Unit · AXIAL-PISTON PUMP
AA11VLO190EP4D/11L-XSDXXN00P-SR902204635
Axial piston pump Bosch Rexroth series A11VO, type code AA11VLO190EP4D/11L-XSDXXN00P-S, material number R902204635. Nominal size: NG 190. Axial piston unit: swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar (A11V). Operating mode: pump, open circuit with charge pump (LO). Direction of rotation: viewed on drive shaft counter-clockwise (L). Drive shaft: splined shaft ANSI B92.1a‒1976 for single pump (S). Mounting flange: SAE J744 ‒ 4-hole (D). Through drive: ‒ ‒ (N00). Connector for solenoids: DEUTSCH connector molded 2-pin, without suppressor diode (P). Standard/special version: special version (S).
- Number
- R902204635
- Type code
- AA11VLO190EP4D/11L-XSDXXN00P-S
- Group
- A11VLO 190
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902152617 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R902149923 | CONNECTION PLATE, LL Assembly parts list →L | 1 | ||
| R902204388 | REGULATOR Assembly parts list →L | 1 | ||
| R902007450 | CONTROL Assembly parts list →L | 1 | ||
| R902007456 | CONTROL Assembly parts list →L | 1 | ||
| R902034541 | COVER Assembly parts list →L | 1 | ||
| R902154870 | HOUSING | 1 | ||
| R902132714 | PIVOT PIN | 4 | ||
| R909449867 | IMPELLER, LEFT-HAND ROTATATION | 1 | ||
| R909921095 | SETSCREW | 2 | ||
| R909153328 | SEALING NUTD | 2 | ||
| R909156649 | SCREW PLUGD | 4 | ||
| R909084762 | SOCKET HEAD CAP SCREW | 4 | ||
| R909157967 | O-RINGD | 1 | ||
| R902601857 | SCREW PLUGD | 1 | ||
| R913016375 | SLOTTED SPRING PIN | 2 | ||
| R909083362 | RETAINING RING | 2 | ||
| R909157039 | SCREW PLUG | 1 | ||
| R902600612 | BLEEDER VALVE | 1 | ||
| R909157039 | SCREW PLUGD | 2 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar | A11V |
| Operating mode | Pump, open circuit with charge pump | LO |
| Size (NG) | 190 | 190 |
| Index | Size 145 … 260 | 1 |
| Direction of rotation | Viewed on drive shaft counter-clockwise | L |
| Drive shaft | Splined shaft ANSI B92.1a‒1976 for single pump | S |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Through drive | ‒ ‒ | N00 |
| Connector for solenoids | DEUTSCH connector molded 2-pin, without suppressor diode | P |
| Standard/special version | Special version | S |