Unit · AXIAL-PISTON PUMP

A11VLO260LRDS/11R-NTD12K84R902217777

Axial piston pump Bosch Rexroth series A11VO, type code A11VLO260LRDS/11R-NTD12K84, material number R902217777. Nominal size: NG 260. Axial piston unit: swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar (A11V). Operating mode: pump, open circuit with charge pump (LO). Control device: power controller fixed setting, with pressure cut-off, with load-sensing (LRDS). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Drive shaft: splined shaft ANSI B92.1a‒1976 for combination pump (T). Mounting flange: SAE J744 ‒ 4-hole (D). Working port: SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 (12). Through drive: 165-4 (E) W 50 × 2 × 24 × 9g (K84).

Number: R902217777
Type code: A11VLO260LRDS/11R-NTD12K84
Group: A11VLO 260
Edition: 06/2020

Pos.	Number	Name	Qty
	R902023761	ROTARY GROUP Assembly parts list →L	1
	R909600263	CONNECTION PLATE, RL Assembly parts list →L	1
	R909441653	REGULATOR Assembly parts list →L	1
	R909600261	CONTROL Assembly parts list →L	1
	R909600262	CONTROL Assembly parts list →L	1
	R902097389	BELL HOUSING Assembly parts list →L	1
	R902094197	HOUSING	1
	R902132714	PIVOT PIN	4
	R909449416	IMPELLER, RIGHT-HAND ROTATION	1
	R909921095	SETSCREW	2
	R909153328	SEALING NUTD	2
	R909153364	SCREW PLUGD	4
	R909831387	SOCKET HEAD CAP SCREW	4
	R909831133	O-RINGD	1
	R909153861	SCREW PLUG	1
	R913016375	SLOTTED SPRING PIN	2
	R909151259	RETAINING RING	2
	R909151979	SCREW PLUG	1
98	R902095614	SEAL KIT	1

Parameters from the type code

Item	Meaning	Code
Axial piston unit	Swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar	A11V
Operating mode	Pump, open circuit with charge pump	LO
Size (NG)	260	260
Control device	Power controller fixed setting, with pressure cut-off, with load-sensing	LRDS
Index	Size 145 … 260	1
Direction of rotation	Viewed on drive shaft clockwise	R
Sealing material	NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber)	N
Drive shaft	Splined shaft ANSI B92.1a‒1976 for combination pump	T
Mounting flange	SAE J744 ‒ 4-hole	D
Working port	SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852	12
Through drive	165-4 (E) W 50 × 2 × 24 × 9g	K84

Parameters from the type code

Other versions 2