Unit · POMPA OSIOWO-TŁOKOWA
A10VG18EP41/10L-NSC16F003SP-SR902217847
Axial piston pump Bosch Rexroth series A10VG, type code A10VG18EP41/10L-NSC16F003SP-S, material number R902217847. Nominal size: NG 18. Axial piston unit: swashplate design, variable, nominal pressure 300 bar, maximum pressure 350 bar (A10V). Operating mode: pump, closed circuit (G). Control device: proportional control, electric P and X1/X U = 24 V (EP4). DA control valve for NG28... 63: without DA control valve (1). Direction of rotation: viewed on drive shaft (L). Sealing material: NBR (nitrile rubber), shaft seal made of FKM (flurocarbon rubber) (N). Drive shaft: splined shaft ANSI B92.1a–1976 for single pump (S). Mounting flange: SAE J744 2-hole (C). Working port (port plate): threaded port A and B, same side right suction port S bottom (16). Boost pump: integrated boost pump with and without through (F). Through drive: without through drive, only for version N and F (00). High-pressure relief valve Setting range ∆pHD: high-pressure relief valve direct operated, 250 … 320 bar without bypass fixed setting (3). Filtration boost circuit/external boost pressure supply: filtration in the boost pump suction line (S). Connector for solenoids: DEUTSCH molded connector, 2-pin, without suppressor diode DT04-2P (P).
- Number
- R902217847
- Type code
- A10VG18EP41/10L-NSC16F003SP-S
- Group
- A10VG 18
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902108157 | MECHANIZM NAPĘDOWY Assembly parts list →L | 1 | ||
| R902005330 | STEROWANIE Assembly parts list →L | 1 | ||
| R902029833 | PŁYTA POŁĄCZENIOWA Assembly parts list →L | 1 | ||
| R902005332 | POMPA ZĘBATA O ZAZĘBIENIU WEWNĘTRZNYM Assembly parts list →L | 1 | ||
| R902156675 | MODUŁ STEROWANIA Assembly parts list →L | 1 | ||
| R902269436 | KORPUS | 1 | ||
| R902114380 | SWORZEŃ OBROTU | 2 | ||
| R913009664 | SZTYFT PROSTY | 1 | ||
| R902005089 | ŚLIZG | 1 | ||
| R909153815 | KOREK GWINTOWANYD | 1 | ||
| R909151692 | KOREK GWINTOWANYD | 4 | ||
| R909151979 | KOREK GWINTOWANYD | 1 | ||
| R909153364 | KOREK GWINTOWANYD | 2 | ||
| R909831318 | PODWÓJNY KOREK ZRYWANY | 1 | ||
| R909156493 | DYSZA | 2 | ||
| R913016373 | KOŁEK SPRĘŻYNUJĄCY | 2 | ||
| R909154589 | O-RINGD | 1 | ||
| 98 | R902095565 | ZESTAW USZCZELNIEŃ | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 300 bar, maximum pressure 350 bar | A10V |
| Operating mode | Pump, closed circuit | G |
| Size (NG) | 18 | 18 |
| Control device | Proportional control, electric P and X1/X U = 24 V | EP4 |
| DA control valve for NG28... 63 | Without DA control valve | 1 |
| Series | Series 1, index 0 | 10 |
| Direction of rotation | Viewed on drive shaft | L |
| Sealing material | NBR (nitrile rubber), shaft seal made of FKM (flurocarbon rubber) | N |
| Drive shaft | Splined shaft ANSI B92.1a–1976 for single pump | S |
| Mounting flange | SAE J744 2-hole | C |
| Working port (port plate) | Threaded port A and B, same side right suction port S bottom | 16 |
| Boost pump | Integrated boost pump with and without through | F |
| Through drive | Without through drive, only for version N and F | 00 |
| High-pressure relief valve Setting range ∆pHD | High-pressure relief valve direct operated, 250 … 320 bar without bypass fixed setting | 3 |
| Filtration boost circuit/external boost pressure supply | Filtration in the boost pump suction line | S |
| Connector for solenoids | DEUTSCH molded connector, 2-pin, without suppressor diode DT04-2P | P |
| Standard/special version | Special version | -S |