Unit · AXIAL-PISTON MOTOR
A6VM215EP5D1P002A/71AWV0E4A21MV-0R902226044
Axial piston motor Bosch Rexroth series A6VM, type code A6VM215EP5D1P002A/71AWV0E4A21MV-0, material number R902226044. Nominal size: NG 215. Axial piston unit: bent-axis design, variable, nominal pressure 6500 psi (450 bar), maximum pressure 7700 psi (A6V). Operating mode: motor (M). Control device: proportional control, electric negative control U = 12 V (EP5). Pressure control/override: pressure control fixed setting, only for HP5, HP6, EP5 and EP6 (D1). Swivel angle detection: without (0). Additional function: without additional function (0). Setting range for displacement: no setting screw short (0-adjustable) (A). Direction of rotation: viewed on drive shaft, bidirectional (W). Sealing material: FKM (fluoroelastomer) (V). Drive shaft bearing: standard bearing (0). Mounting flange: SAE J744 165-4 (E4). Working port: SAE working ports A and B at rear (1). Valve: 9.77 (37) (M). Speed sensor: with DSA/12 speed sensor mounted (V).
- Number
- R902226044
- Type code
- A6VM215EP5D1P002A/71AWV0E4A21MV-0
- Group
- A6VM 215
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902224341 | HOUSING Assembly parts list →L | 1 | |
| 2 | R902130669 | ROTARY GROUP Assembly parts list →L | 1 | |
| 3 | R902149470 | COVER PLATE Assembly parts list →L | 1 | |
| 4 | R902224343 | CONTROL PART Assembly parts list →L | 1 | |
| 5 | R902224342 | FLUSH/BOOST PRESSURE VALVE Assembly parts list →L | 1 | |
| 6 | R902236082 | SENSOR Assembly parts list →L | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Bent-axis design, variable, nominal pressure 6500 psi (450 bar), maximum pressure 7700 psi | A6V |
| Operating mode | Motor | M |
| Size (NG) | 215 | 215 |
| Control device | Proportional control, electric negative control U = 12 V | EP5 |
| Pressure control/override | Pressure control fixed setting, only for HP5, HP6, EP5 and EP6 | D1 |
| DEUTSCH - molded connector, 2-pin, without suppressor diode | P | |
| Swivel angle detection | Without | 0 |
| Additional function | Without additional function | 0 |
| Setting range for displacement | No setting screw short (0-adjustable) | A |
| Series | Series 7, Index 1 | 71 |
| Direction of rotation | Viewed on drive shaft, bidirectional | W |
| Sealing material | FKM (fluoroelastomer) | V |
| Drive shaft bearing | Standard bearing | 0 |
| Mounting flange | SAE J744 165-4 | E4 |
| Working port | SAE working ports A and B at rear | 1 |
| Valve | 9.77 (37) | M |
| Speed sensor | With DSA/12 speed sensor mounted | V |
| Standard/special version | Standard version | 0 |