Unit · AXIAL-PISTON PUMP
AA11VLO145LG1DH1/11L-NSD62K02R902232779
Axial piston pump Bosch Rexroth series A11VO, type code AA11VLO145LG1DH1/11L-NSD62K02, material number R902232779. Nominal size: NG 145. Axial piston unit: swashplate design, variable, nominal pressure 5100 psi (350 bar), maximum pressure 5800 psi (A11V). Operating mode: pump, open circuit with charge pump (LO). Control device: with override pilot-pressure related negative control, with pressure cut-off, with hydraulic negative control Δp = 365 psi (25 bar) stroke limiter (LG1DH1). Direction of rotation: viewed on drive shaft counter-clockwise (L). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Drive shaft: splined shaft ANSI B92.1a‒1976 for single pump (S). Mounting flange: SAE J744 ‒ 4-hole (D). Working port: SAE pressure and suction port at side, opposite, UNC fastening thread. Port thread, UNF with profile sealing ring based on ISO 11926 (62). Through drive: 101-2 (B) 7/8 in 13T 16/32DP B (K02).
- Number
- R902232779
- Type code
- AA11VLO145LG1DH1/11L-NSD62K02
- Group
- A11VLO 145
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902061835 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R902085875 | CONNECTION PLATE, LL Assembly parts list →L | 1 | ||
| 3 | R902240586 | REGULATOR Assembly parts list →L | 1 | |
| R909601773 | CONTROL Assembly parts list →L | 1 | ||
| 5 | R909601775 | CONTROL Assembly parts list →L | 1 | |
| R909601258 | BELL HOUSING Assembly parts list →L | 1 | ||
| R902117357 | HOUSING | 1 | ||
| 11 | R902132714 | PIVOT PIN | 4 | |
| R909921290 | IMPELLER, LEFT-HAND ROTATATION | 1 | ||
| R909449078 | SETSCREW | 2 | ||
| R909152426 | SEALING NUTD | 2 | ||
| R909153364 | SCREW PLUGD | 4 | ||
| R909830782 | SOCKET HEAD CAP SCREW | 4 | ||
| R909083835 | O-RINGD | 1 | ||
| R909154480 | SCREW PLUG | 1 | ||
| R913016373 | SLOTTED SPRING PIN | 2 | ||
| R909083360 | RETAINING RING | 2 | ||
| R902220058 | SHUTTLE VALVE Assembly parts list →L | 1 | ||
| 98 | R902095609 | SEAL KIT | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 5100 psi (350 bar), maximum pressure 5800 psi | A11V |
| Operating mode | Pump, open circuit with charge pump | LO |
| Size (NG) | 145 | 145 |
| Control device | with override pilot-pressure related negative control, with pressure cut-off, with hydraulic negative control Δp = 365 psi (25 bar) stroke limiter | LG1DH1 |
| Index | Size 145 … 260 | 1 |
| Direction of rotation | Viewed on drive shaft counter-clockwise | L |
| Sealing material | NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) | N |
| Drive shaft | Splined shaft ANSI B92.1a‒1976 for single pump | S |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Working port | SAE pressure and suction port at side, opposite, UNC fastening thread. Port thread, UNF with profile sealing ring based on ISO 11926 | 62 |
| Through drive | 101-2 (B) 7/8 in 13T 16/32DP B | K02 |