Unit · AXIAL-PISTON PUMP
A11VO260LE4S5/11R-NZD12K01P-S+AZPFF-12R902235382
Axial piston pump Bosch Rexroth series A11VO, type code A11VO260LE4S5/11R-NZD12K01P-S+AZPFF-12, material number R902235382. Axial piston unit: swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar (A11V). Operating mode: pump, open circuit without charge pump (O). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Drive shaft: splined shaft DIN 5480 for single and combination pump (Z). Mounting flange: SAE J744 ‒ 4-hole (D). Working port: SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 (12). Through drive: 82-2 (A) 5/8 in 9T 16/32DP A (K01). Connector for solenoids: DEUTSCH connector molded 2-pin, without suppressor diode (P). Standard/special version: special version (S).
- Number
- R902235382
- Type code
- A11VO260LE4S5/11R-NZD12K01P-S+AZPFF-12
- Group
- A11VO 260
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902235381 | AXIAL-PISTON PUMP Assembly parts list →L | 1 | ||
| R902601174 | FLANGE Assembly parts list →L | 2 | ||
| R902601107 | FLANGE Assembly parts list →L | 2 | ||
| 0510665141 | HYDRAULIC GEAR PUMPL | 1 | ||
| R909083249 | SPRING LOCK WASHER | 16 | ||
| R909083021 | SOCKET HEAD CAP SCREW | 16 | ||
| R909083058 | SOCKET HEAD CAP SCREW | 2 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar | A11V |
| Operating mode | Pump, open circuit without charge pump | O |
| Index | Size 145 … 260 | 1 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) | N |
| Drive shaft | Splined shaft DIN 5480 for single and combination pump | Z |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Working port | SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 | 12 |
| Through drive | 82-2 (A) 5/8 in 9T 16/32DP A | K01 |
| Connector for solenoids | DEUTSCH connector molded 2-pin, without suppressor diode | P |
| Standard/special version | Special version | S |