Unit · SILNIK TŁOKOWY OSIOWY
AA11VLO260DRG/11R-WSD62N00-SR902235409
Axial piston motor Bosch Rexroth series A11VO, type code AA11VLO260DRG/11R-WSD62N00-S, material number R902235409. Nominal size: NG 260. Axial piston unit: swashplate design, variable, nominal pressure 5100 psi (350 bar), maximum pressure 5800 psi (A11V). Operating mode: pump, open circuit with charge pump (LO). Control device: pressure controller hydraulic remote controlled (DRG). Direction of rotation: viewed on drive shaft clockwise (R). Drive shaft: splined shaft ANSI B92.1a‒1976 for single pump (S). Mounting flange: SAE J744 ‒ 4-hole (D). Working port: SAE pressure and suction port at side, opposite, UNC fastening thread. Port thread, UNF with profile sealing ring based on ISO 11926 (62). Through drive: ‒ ‒ (N00). Standard/special version: special version (S).
- Number
- R902235409
- Type code
- AA11VLO260DRG/11R-WSD62N00-S
- Group
- A11VLO 260
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902013701 | MECHANIZM NAPĘDOWY Assembly parts list →L | 1 | ||
| R902089667 | PŁYTA POŁĄCZENIOWA, GWINT PRAWY Assembly parts list →L | 1 | ||
| R902099631 | REGULATOR Assembly parts list →L | 1 | ||
| R902007015 | STEROWANIE Assembly parts list →L | 1 | ||
| R909600262 | STEROWANIE Assembly parts list →L | 1 | ||
| R902034541 | POKRYWA Assembly parts list →L | 1 | ||
| R902094198 | KORPUS | 1 | ||
| R902132714 | SWORZEŃ OBROTU | 4 | ||
| R909449416 | WIRNIK, OBROTY PRAWE | 1 | ||
| R909921095 | SZTYFT GWINTOWANY | 2 | ||
| R909153328 | NAKRĘTKA USZCZELNIAJĄCAD | 2 | ||
| R909156649 | KOREK GWINTOWANYD | 4 | ||
| R909831387 | ŚRUBA Z ŁBEM WALCOWYM | 4 | ||
| R909831133 | O-RINGD | 1 | ||
| R902601857 | KOREK GWINTOWANY | 1 | ||
| R913016375 | KOŁEK SPRĘŻYNUJĄCY | 2 | ||
| R909151259 | PIERŚCIEŃ ZABEZPIECZAJĄCY | 2 | ||
| R913044793 | KOREK GWINTOWANY | 1 | ||
| R902600612 | ZAWÓR ODPOWIETRZAJĄCY | 2 | ||
| 98 | R902095936 | ZESTAW USZCZELNIEŃ | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 5100 psi (350 bar), maximum pressure 5800 psi | A11V |
| Operating mode | Pump, open circuit with charge pump | LO |
| Size (NG) | 260 | 260 |
| Control device | Pressure controller hydraulic remote controlled | DRG |
| Index | Size 145 … 260 | 1 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Drive shaft | Splined shaft ANSI B92.1a‒1976 for single pump | S |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Working port | SAE pressure and suction port at side, opposite, UNC fastening thread. Port thread, UNF with profile sealing ring based on ISO 11926 | 62 |
| Through drive | ‒ ‒ | N00 |
| Standard/special version | Special version | S |