Unit · AXIAL-PISTON PUMP
A11VO95LE2S/10R-NZD12K01VP+AZPFR902239945
Axial piston pump Bosch Rexroth series A11VO, type code A11VO95LE2S/10R-NZD12K01VP+AZPF, material number R902239945. Nominal size: NG 95. Axial piston unit: swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar (A11V). Operating mode: pump, open circuit without charge pump (O). Control device: with override electric negative control U = 24 V, with load-sensing (LE2S). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Drive shaft: splined shaft DIN 5480 for single and combination pump (Z). Mounting flange: SAE J744 ‒ 4-hole (D). Working port: SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 (12). Through drive: 82-2 (A) 5/8 in 9T 16/32DP A (K01). Swivel angle indicator: with optical swivel angle indicator (V). Connector for solenoids: DEUTSCH connector molded 2-pin, without suppressor diode (P).
- Number
- R902239945
- Type code
- A11VO95LE2S/10R-NZD12K01VP+AZPF
- Group
- A11VO 95
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902239944 | AXIAL-PISTON PUMP Assembly parts list →L | 1 | ||
| 6 | 0510625071 | HYDRAULIC GEAR PUMPL | 1 | |
| R909083058 | SOCKET HEAD CAP SCREW | 2 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar | A11V |
| Operating mode | Pump, open circuit without charge pump | O |
| Size (NG) | 95 | 95 |
| Control device | with override electric negative control U = 24 V, with load-sensing | LE2S |
| Index | Size 40 … 130 | 0 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) | N |
| Drive shaft | Splined shaft DIN 5480 for single and combination pump | Z |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Working port | SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 | 12 |
| Through drive | 82-2 (A) 5/8 in 9T 16/32DP A | K01 |
| Swivel angle indicator | With optical swivel angle indicator | V |
| Connector for solenoids | DEUTSCH connector molded 2-pin, without suppressor diode | P |