Unit · AXIAL-PISTON PUMP
A11VLO130LRGU6/10R-NSD12K01GP-SR902243024
Axial piston pump Bosch Rexroth series A11VO, type code A11VLO130LRGU6/10R-NSD12K01GP-S, material number R902243024. Nominal size: NG 130. Axial piston unit: swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar (A11V). Operating mode: pump, open circuit with charge pump (LO). Control device: power controller fixed setting, with pressure cut-off hydraulic remote controlled, with electric stroke limiter with manual override and spring return (LRGU6). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Drive shaft: splined shaft ANSI B92.1a‒1976 for single pump (S). Mounting flange: SAE J744 ‒ 4-hole (D). Working port: SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 (12). Through drive: 82-2 (A) 5/8 in 9T 16/32DP A (K01). Connector for solenoids: DEUTSCH connector molded 2-pin, without suppressor diode (P). Standard/special version: special version (S).
- Number
- R902243024
- Type code
- A11VLO130LRGU6/10R-NSD12K01GP-S
- Group
- A11VLO 130
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902096437 | ROTARY GROUP Assembly parts list →L | 1 | |
| 2 | R909448362 | CONNECTION PLATE, RL Assembly parts list →L | 1 | |
| 3 | R902240942 | REGULATOR Assembly parts list →L | 1 | |
| 4 | R909601773 | CONTROL Assembly parts list →L | 1 | |
| 5 | R909601775 | CONTROL Assembly parts list →L | 1 | |
| 7 | R909601128 | BELL HOUSING Assembly parts list →L | 1 | |
| 10 | R902117359 | HOUSING | 1 | |
| 11 | R902132714 | PIVOT PIN | 4 | |
| 12 | R909921832 | IMPELLER, RIGHT-HAND ROTATION | 1 | |
| 14 | R902602010 | SEAL SCREWD | 1 | |
| 20 | R909449078 | SETSCREW | 2 | |
| 22 | R909152426 | SEALING NUTD | 2 | |
| 24 | R909153364 | SCREW PLUGD | 4 | |
| 25 | R909830782 | SOCKET HEAD CAP SCREW | 4 | |
| 26 | R909083835 | O-RINGD | 1 | |
| 27 | R909153891 | SCREW PLUG | 1 | |
| 28 | R913016373 | SLOTTED SPRING PIN | 2 | |
| 29 | R909083360 | RETAINING RING | 2 | |
| 40 | R902123558 | SHUTTLE VALVE Assembly parts list →L | 1 | |
| 98 | R902095610 | SEAL KITD | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar | A11V |
| Operating mode | Pump, open circuit with charge pump | LO |
| Size (NG) | 130 | 130 |
| Control device | Power controller fixed setting, with pressure cut-off hydraulic remote controlled, with electric stroke limiter with manual override and spring return | LRGU6 |
| Index | Size 40 … 130 | 0 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) | N |
| Drive shaft | Splined shaft ANSI B92.1a‒1976 for single pump | S |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Working port | SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 | 12 |
| Through drive | 82-2 (A) 5/8 in 9T 16/32DP A | K01 |
| Connector for solenoids | DEUTSCH connector molded 2-pin, without suppressor diode | P |
| Standard/special version | Special version | S |