Unit · AXIAL-PISTON PUMP
A4VG280EP1APRX0/40MRNE4XX1FB2S4HF00-SR902243187
Axial piston pump Bosch Rexroth series A4VG, type code A4VG280EP1APRX0/40MRNE4XX1FB2S4HF00-S, material number R902243187. Nominal size: NG 280. Axial piston unit: swashplate design, variable, nominal pressure 450 bar, maximum pressure 500 bar (A4V). Operating mode: pump, closed circuit (G). Control device: proportional control, U = 12 V electric (EP1). Connector for solenoids: DEUTSCH molded connector, 2-pin – without suppressor diode (P). Swivel angle sensor: electric swivel angle sensor (DWS20-1, 3-pin) (R). DA control valve (only for NG110 and 125): without DA control valve (0). Configuration of port and fastening threads: metric ports according to ISO 6149 with O-ring seal, metric fastening thread according to DIN (M). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: NBR (nitrile rubber), shaft seal in FKM (fluoroelastomer) (N). Mounting flange: SAE J744 165-4 (E4). Working port: SAE working port A and B, on left side (45° left) (1). Boost pump and rotary group configuration: standard rotary group boost pump integrated, standard internal gear pump (F). Through drive: 101-2 (B) B2 7/8 in 13T 16/32DP S4 (B2S4). Filtration boost circuit/external boost pressure supply: attachment filter with cold start valve (F).
- Number
- R902243187
- Type code
- A4VG280EP1APRX0/40MRNE4XX1FB2S4HF00-S
- Group
- A4VG 280
- Edition
- 01/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902236698 | ROTARY GROUP Assembly parts list →L | 1 | |
| 2 | R902132963 | CONTROL Assembly parts list →L | 1 | |
| 3 | R902243725 | PUMP HOUSING Assembly parts list →L | 1 | |
| 4 | R902237618 | INTERNAL GEAR PUMP Assembly parts list →L | 1 | |
| 5 | R902215862 | CONTROL MODULE Assembly parts list →L | 1 | |
| 6 | R902199968 | BEARING FLANGE Assembly parts list →L | 1 | |
| 8 | R902099527 | MOUNTABLE FILTER Assembly parts list →L | 1 | |
| 9 | R902201151 | UNLOADING VALVE Assembly parts list →L | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 450 bar, maximum pressure 500 bar | A4V |
| Operating mode | Pump, closed circuit | G |
| Size (NG) | 280 | 280 |
| Control device | Proportional control, U = 12 V electric | EP1 |
| Connector for solenoids | DEUTSCH molded connector, 2-pin – without suppressor diode | P |
| Swivel angle sensor | Electric swivel angle sensor (DWS20-1, 3-pin) | R |
| DA control valve (only for NG110 and 125) | Without DA control valve | 0 |
| Configuration of port and fastening threads | Metric ports according to ISO 6149 with O-ring seal, metric fastening thread according to DIN | M |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | NBR (nitrile rubber), shaft seal in FKM (fluoroelastomer) | N |
| Mounting flange | SAE J744 165-4 | E4 |
| Working port | SAE working port A and B, on left side (45° left) | 1 |
| Boost pump and rotary group configuration | Standard rotary group boost pump integrated, standard internal gear pump | F |
| Through drive | 101-2 (B) B2 7/8 in 13T 16/32DP S4 | B2S4 |
| Filtration boost circuit/external boost pressure supply | Attachment filter with cold start valve | F |
| Pressure sensor | Without pressure sensor | 0 |
| Other sensors | Without sensor | 0 |
| Standard / special version | Special version | S |