Unit · AXIAL-PISTON PUMP
A11VO190LRH1/11R-NPD12K24+PGH5R902247125
Axial piston pump Bosch Rexroth series A11VO, type code A11VO190LRH1/11R-NPD12K24+PGH5, material number R902247125. Nominal size: NG 190. Axial piston unit: swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar (A11V). Operating mode: pump, open circuit without charge pump (O). Control device: power controller fixed setting, with hydraulic negative control Δp = 25 bar stroke limiter (LRH1). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Drive shaft: parallel keyed shaft DIN 6885 (P). Mounting flange: SAE J744 ‒ 4-hole (D). Working port: SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 (12). Through drive: 127-2/-2+4 (C) 1 1/2 in 17T 12/24DP C-C (K24).
- Number
- R902247125
- Type code
- A11VO190LRH1/11R-NPD12K24+PGH5
- Group
- A11VO 190
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902247124 | AXIAL-PISTON PUMP Assembly parts list →L | 1 | ||
| 6 | R901147132 | INTERNAL GEAR PUMP Assembly parts list →L | 1 | |
| R909083716 | HEXAGON SCREW | 2 | ||
| 20 | R909430408 | WASHER | 2 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar | A11V |
| Operating mode | Pump, open circuit without charge pump | O |
| Size (NG) | 190 | 190 |
| Control device | Power controller fixed setting, with hydraulic negative control Δp = 25 bar stroke limiter | LRH1 |
| Index | Size 145 … 260 | 1 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) | N |
| Drive shaft | Parallel keyed shaft DIN 6885 | P |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Working port | SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 | 12 |
| Through drive | 127-2/-2+4 (C) 1 1/2 in 17T 12/24DP C-C | K24 |