Unit · AXIAL-PISTON MOTOR
A6VM150EPWD2L001G/71MWV0R4A11D0-SR902257519
Axial piston motor Bosch Rexroth series A6VM, type code A6VM150EPWD2L001G/71MWV0R4A11D0-S, material number R902257519. Nominal size: NG 150. Axial piston unit: bent-axis design, variable displacement (A6V). Operating mode: motor (M). Control device: proportional control, electric negative control U = 24 V (EPW). Connector for solenoids: cable without connector (end-splice) (L). Additional function: without (0). Additional function: without (0). Stroking time damping: damping HP, EP, HP5,6D. and EPV,WD., HZ, HA with (1). Setting range for displacement: short Long (G). Version of port and fastening threads: metric ports based on ISO 6149 with O-ring seal, metric fastening threads according to DIN 13 (M). Direction of rotation: viewed on drive shaft, bi-directional (W). Drive shaft bearing: standard bearing (0). Mounting flange: ISO 3019-2 180-4 (R4). Drive shaft: splined shaft DIN 5480 W45×2×21×9g (A1). Working port: SAE working ports A and B at rear (1).
- Number
- R902257519
- Type code
- A6VM150EPWD2L001G/71MWV0R4A11D0-S
- Group
- A6VM 150
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902230359 | HOUSING Assembly parts list →L | 1 | |
| 2 | R902132104 | ROTARY GROUP Assembly parts list →L | 1 | |
| 3 | R902130552 | COVER PLATE Assembly parts list →L | 1 | |
| 4 | R902257006 | CONTROL PART Assembly parts list →L | 1 | |
| 5 | R902242794 | FLUSH/BOOST PRESSURE VALVE Assembly parts list →L | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Bent-axis design, variable displacement | A6V |
| Operating mode | Motor | M |
| Size (NG) | 150 | 150 |
| Control device | Proportional control, electric negative control U = 24 V | EPW |
| Connector for solenoids | Cable without connector (end-splice) | L |
| Additional function | Without | 0 |
| Additional function | Without | 0 |
| Stroking time damping | Damping HP, EP, HP5,6D. and EPV,WD., HZ, HA with | 1 |
| Setting range for displacement | Short Long | G |
| Series | Series 7, index 1 | 71 |
| Version of port and fastening threads | Metric ports based on ISO 6149 with O-ring seal, metric fastening threads according to DIN 13 | M |
| Direction of rotation | Viewed on drive shaft, bi-directional | W |
| Drive shaft bearing | Standard bearing | 0 |
| Mounting flange | ISO 3019-2 180-4 | R4 |
| Drive shaft | Splined shaft DIN 5480 W45×2×21×9g | A1 |
| Working port | SAE working ports A and B at rear | 1 |
| Valve | Flushing flow [l/min] qv, only possible with port plates 1, 2 and 4 10 | D |
| Additional function | Without | 0 |
| Standard/special version | Special version | S |