Unit · AXIAL-PISTON MOTOR
A6VM160EP600P001B/65MWV0R4T21DU-YR902276969
Axial piston motor Bosch Rexroth series A6VM, type code A6VM160EP600P001B/65MWV0R4T21DU-Y, material number R902276969. Nominal size: NG 160. Axial piston unit: bent-axis design, variable displacement (A6V). Operating mode: motor (M). Control device: proportional control, electric negative control U = 24 V (EP6). Pressure control/override: without pressure control/override (00). Connector for solenoids: DEUTSCH - molded connector, 2-pin, without suppressor diode (P). Swivel angle sensor: without swivel angle sensor (0). Additional function: without additional function (0). Stroking time damping: damping HP, EP, HP5,6D. and EP5,6D., HZ, EZ, HA with (1). Setting range for displacement: without setting screw moderate (B). Version of port and fastening threads: metric ports based on ISO 6149 with O-ring seal, metric fastening thread according to DIN 13 (M). Direction of rotation: viewed on drive shaft, bi-directional (W). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft bearing: standard bearing (0). Mounting flange: ISO 3019-2 180-4 (R4).
- Number
- R902276969
- Type code
- A6VM160EP600P001B/65MWV0R4T21DU-Y
- Group
- A6VM 160
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902276127 | HOUSING Assembly parts list →L | 1 | |
| 2 | R902281514 | ROTARY GROUP Assembly parts list →L | 1 | |
| 3 | R902270288 | COVER PLATE Assembly parts list →L | 1 | |
| 4 | R902110495 | CONTROL PART Assembly parts list →L | 1 | |
| 5 | R902224333 | FLUSH/BOOST PRESSURE VALVE Assembly parts list →L | 1 | |
| 6 | R902191651 | FLANGE COVER | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Bent-axis design, variable displacement | A6V |
| Operating mode | Motor | M |
| Size (NG) | 160 | 160 |
| Control device | Proportional control, electric negative control U = 24 V | EP6 |
| Pressure control/override | Without pressure control/override | 00 |
| Connector for solenoids | DEUTSCH - molded connector, 2-pin, without suppressor diode | P |
| Swivel angle sensor | Without swivel angle sensor | 0 |
| Additional function | Without additional function | 0 |
| Stroking time damping | Damping HP, EP, HP5,6D. and EP5,6D., HZ, EZ, HA with | 1 |
| Setting range for displacement | Without setting screw moderate | B |
| Series | Series 6, index 5 (nominal pressure 400 bar) | 65 |
| Version of port and fastening threads | Metric ports based on ISO 6149 with O-ring seal, metric fastening thread according to DIN 13 | M |
| Direction of rotation | Viewed on drive shaft, bi-directional | W |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft bearing | Standard bearing | 0 |
| Mounting flange | ISO 3019-2 180-4 | R4 |
| Drive shaft | Splined shaft ANSI B92.1a‒1976 2 in 15T 8/16DP | T2 |
| Working port | SAE working port A and B at rear | 1 |
| Valve | 10 | D |
| Standard/special version | Standard version with installation variants, e.g. T ports open or closed | Y |