Unit · BASE UNIT
G A10VSO 18 DG /31R-VPA12K51R902412455
Base unit Bosch Rexroth series A10VSO, type code GA10VSO18DG/31R-VPA12K51, material number R902412455. Nominal size: NG 18. Axial piston unit: swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar (A10VS). Operating mode: pump, open circuit (O). Control device: two-point control, direct operated (DG). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: parallel keyed shaft DIN 6885 permissible through-drive torque (P). Mounting flange: ISO 3019-2 2-hole (A). Working port: SAE flange ports according to ISO 6162, metric fastening thread laterally opposite (12).
- Number
- R902412455
- Type code
- G A10VSO 18 DG /31R-VPA12K51
- Group
- A10VSO 18
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R910940435 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R902411385 | ADJUSTING PIECE Assembly parts list →L | 1 | ||
| R910925328 | PUMP HOUSING | 1 | ||
| 6 | R902542690 | CONNECTION PLATE | 1 | |
| R910960809 | SWASH PLATE | 1 | ||
| R902413734 | DRIVE SHAFT | 1 | ||
| R910125504 | PARALLEL KEY | 1 | ||
| 11 | R910936420 | HUB | 1 | |
| R902400729 | ADJUSTMENT SHIM | 1 | ||
| 15 | R910704954 | TAPERED-ROLLER BEARING | 1 | |
| R909086994 | TAPERED-ROLLER BEARING | 1 | ||
| R910925266 | BEARING SHELL | 2 | ||
| R910900853 | SHAFT SEALING RINGD | 1 | ||
| R910928325 | O-RINGD | 1 | ||
| R913052100 | R-RINGD | 4 | ||
| 24 | R910357049 | O-RING | 1 | |
| R902403815 | RETAINING RING | 1 | ||
| 27 | R910231991 | SOCKET HEAD CAP SCREW | 4 | |
| R909156864 | SCREW PLUGD | 1 | ||
| 31 | R909831318 | DOUBLE BREAK-OFF PLUG | 1 | |
| R910277193 | STRAIGHT PIN | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar | A10VS |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 18 | 18 |
| Control device | Two-point control, direct operated | DG |
| Series | Series 3, index 1 | 31 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | Parallel keyed shaft DIN 6885 permissible through-drive torque | P |
| Mounting flange | ISO 3019-2 2-hole | A |
| Working port | SAE flange ports according to ISO 6162, metric fastening thread laterally opposite | 12 |