Unit · BASE UNIT
GE A10V O 71 OV /31R-PPC11N00R902432446
Base unit Bosch Rexroth series A10VO, type code GEA10VO71OV/31R-PPC11N00, material number R902432446. Nominal size: NG 71. Axial piston unit: swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (5100 psi) (A10V). Operating mode: pump, open circuit (O). Direction of rotation: viewed on drive shaft Clockwise (R). Mounting flange: based on ISO 3019-1 (SAE) 2-hole (C). Working port: SAE flange connections Fastening thread according to ISO 6162, metric; rear working ports metric Not for through drive (11). Through drive: without through drive (N00).
- Number
- R902432446
- Type code
- GE A10V O 71 OV /31R-PPC11N00
- Group
- A10VO 71
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R910956007 | ROTARY GROUP Assembly parts list →L | 1 | |
| 2 | R910910873 | ADJUSTING PIECE Assembly parts list →L | 1 | |
| 5 | R910915775 | PUMP HOUSING | 1 | |
| 6 | R910942303 | CONNECTION PLATE | 1 | |
| 7 | R910961017 | SWASH PLATE Assembly parts list →L | 1 | |
| 8 | R910995064 | DRIVE SHAFT | 1 | |
| 9 | R910902888 | PARALLEL KEY | 1 | |
| 12 | R902439613 | ADJUSTMENT SHIM | 1 | |
| 15 | R910729949 | CYL. ROLLER BEARING | 1 | |
| 16 | R910729922 | CYL. ROLLER BEARING | 1 | |
| 17 | R910902777 | BEARING SHELL | 2 | |
| 20 | R910916105 | ROTARY SHAFT LIP SEALD | 1 | |
| 22 | R910720194 | O-RINGD | 1 | |
| 23 | R913052118 | R-RINGD | 4 | |
| 25 | R910941918 | RETAINING RING | 1 | |
| 27 | R910110272 | SOCKET HEAD CAP SCREW | 4 | |
| 30 | R909153339 | SCREW PLUGD | 1 | |
| 31 | R909831318 | DOUBLE BREAK-OFF PLUG | 1 | |
| 33 | R902533908 | STRAIGHT PIN | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (5100 psi) | A10V |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 71 | 71 |
| Series | Series 3, index 1 | 31 |
| Direction of rotation | Viewed on drive shaft Clockwise | R |
| Mounting flange | Based on ISO 3019-1 (SAE) 2-hole | C |
| Working port | SAE flange connections Fastening thread according to ISO 6162, metric; rear working ports metric Not for through drive | 11 |
| Through drive | Without through drive | N00 |