Unit · BASE UNIT
G A10VSO140 DFE /31L-VSB12K07 LR -SO273R902436862
Base unit Bosch Rexroth series A10VSO, type code GA10VSO140DFE/31L-VSB12K07LR-SO273, material number R902436862. Nominal size: NG 140. Version: standard version (without symbol), swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar (A10VS). Operating mode: pump, open circuit (O). Directions of rotation: viewed on drive shaft counter-clockwise (L). Drive shafts: splined shaft Standard shaft ANSI B92.1a (S). Working port: SAE flange ports, laterally opposite fastening thread, metric (12). Special version no. 273.
- Number
- R902436862
- Type code
- G A10VSO140 DFE /31L-VSB12K07 LR -SO273
- Group
- A10VSO 140
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R910945537 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R910942716 | ADJUSTING PIECE Assembly parts list →L | 1 | ||
| R910988235 | PUMP HOUSING | 1 | ||
| R902401505 | CONNECTION PLATE | 1 | ||
| R902467245 | SWASH PLATE | 1 | ||
| R910987710 | DRIVE SHAFT | 1 | ||
| R902425273 | ADJUSTMENT SHIM | 1 | ||
| 14 | R910988055 | STOP RING | 1 | |
| R910918203 | TAPERED-ROLLER BEARING | 1 | ||
| R910918201 | TAPERED-ROLLER BEARING | 1 | ||
| R910918174 | BEARING SHELL | 2 | ||
| R909831178 | SHAFT SEALING RINGD | 1 | ||
| R910930461 | O-RINGD | 1 | ||
| R913053032 | R-RINGD | 4 | ||
| R910631175 | O-RINGD | 1 | ||
| R910941920 | RETAINING RING | 1 | ||
| R910659169 | SOCKET HEAD CAP SCREW | 4 | ||
| R909156984 | SCREW PLUGD | 1 | ||
| R909831319 | DOUBLE BREAK-OFF PLUG | 1 | ||
| R910922017 | STRAIGHT PIN | 1 | ||
| 34 | R913011609 | SCREW PLUG | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Version | Standard version (without symbol), swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar | A10VS |
| Operating mode | Pump, open circuit | O |
| Sizes (NG) | 140 | 140 |
| Series | Series 3, index 1 | 31 |
| Directions of rotation | Viewed on drive shaft counter-clockwise | L |
| Drive shafts | Splined shaft Standard shaft ANSI B92.1a | S |
| Working port | SAE flange ports, laterally opposite fastening thread, metric | 12 |