Unit · BASE UNIT
G A10VSO140 OV /31R-PSB12KB7R902436870
Base unit Bosch Rexroth series A10VSO, type code GA10VSO140OV/31R-PSB12KB7, material number R902436870. Nominal size: NG 140. Axial piston unit: swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar (A10VS). Operating mode: pump, open circuit (O). Direction of rotation: viewed on drive shaft clockwise (R). Drive shaft: splined shaft standard shaft ISO 3019-1 (S). Mounting flange: ISO 3019-2; 4-hole (B). Port: SAE flange ports fastening thread, top, bottom, opposite metric. (12). Through drive: ISO 180, 4-hole 1 3/4 in 13T 8/16DP (KB7).
- Number
- R902436870
- Type code
- G A10VSO140 OV /31R-PSB12KB7
- Group
- A10VSO 140
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902483660 | ROTARY GROUP Assembly parts list →L | 1 | |
| 2 | R910917597 | ADJUSTING PIECE Assembly parts list →L | 1 | |
| 5 | R910918190 | PUMP HOUSING | 1 | |
| 6 | R910962772 | CONNECTION PLATE | 1 | |
| 7 | R910961081 | SWASH PLATE | 1 | |
| 8 | R910987710 | DRIVE SHAFT | 1 | |
| 10 | R910932172 | SPLINED COUPLING | 1 | |
| 12 | R902425273 | ADJUSTMENT SHIM | 1 | |
| 15 | R910918203 | TAPERED-ROLLER BEARING | 1 | |
| 16 | R910918201 | TAPERED-ROLLER BEARING | 1 | |
| 17 | R910918174 | BEARING SHELL | 2 | |
| 20 | R910978001 | SHAFT SEALING RINGD | 1 | |
| 22 | R910930460 | O-RINGD | 1 | |
| 23 | R913053033 | R-RINGD | 4 | |
| 24 | R910924838 | O-RINGD | 1 | |
| 25 | R910941920 | RETAINING RING | 1 | |
| 27 | R910659169 | SOCKET HEAD CAP SCREW | 4 | |
| 30 | R909153365 | SCREW PLUGD | 1 | |
| 31 | R909831318 | DOUBLE BREAK-OFF PLUG | 1 | |
| 33 | R910922017 | STRAIGHT PIN | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar | A10VS |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 140 | 140 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Drive shaft | Splined shaft standard shaft ISO 3019-1 | S |
| Mounting flange | ISO 3019-2; 4-hole | B |
| Port | SAE flange ports fastening thread, top, bottom, opposite metric. | 12 |
| Through drive | ISO 180, 4-hole 1 3/4 in 13T 8/16DP | KB7 |