Unit · BASE UNIT
G A10VSO 10 OV /52R-VUC64N00 -S1768R902438462
Base unit Bosch Rexroth series A10VSO, type code GA10VSO10OV/52R-VUC64N00-S1768, material number R902438462. Nominal size: NG 10. Axial piston unit: swashplate design, variable, nominal pressure 4100 psi (280 bar), maximum pressure 5100 psi (350 bar) (A10VS). Operating mode: pump, open circuit (O). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: splined shaft ISO 3019-1 reduced diameter, not for through drive (U). Mounting flange: ISO 3019-1 2-hole (C). Through drive: without through drive (N00). Special version no. 1768.
- Number
- R902438462
- Type code
- G A10VSO 10 OV /52R-VUC64N00 -S1768
- Group
- A10VSO 10
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R910984009 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R910984010 | ADJUSTING PISTON | 1 | ||
| R910984013 | PISTON GUIDE | 1 | ||
| R910984014 | BALL STOP | 1 | ||
| R910987788 | PUMP HOUSING | 1 | ||
| R902432621 | CONNECTION PLATE | 1 | ||
| R910987787 | SWASH PLATE | 1 | ||
| R902413722 | DRIVE SHAFT | 1 | ||
| R910987961 | SEALING FLANGE | 1 | ||
| R910984023 | COMPRESSION SPRING | 1 | ||
| R910933408 | STOP SCREW | 1 | ||
| R910984871 | DEEP-GROOVE BALL BEARING | 1 | ||
| R910984012 | NEEDLE BEARING | 1 | ||
| R910972683 | BEARING SHELL | 1 | ||
| R910985220 | BEARING SHELL | 1 | ||
| R902400728 | ROTARY SHAFT LIP SEALD | 1 | ||
| R910804886 | O-RING | 2 | ||
| R902650501 | O-RINGD | 1 | ||
| R910977816 | O-RINGD | 1 | ||
| R910942133 | R-RING | 1 | ||
| R910791555 | V-RING | 1 | ||
| R910984021 | RETAINING RING | 1 | ||
| R910984872 | V-RING | 1 | ||
| R902403815 | RETAINING RING | 1 | ||
| R910193216 | SOCKET HEAD CAP SCREW | 4 | ||
| R909157039 | SCREW PLUGD | 1 | ||
| R909831317 | DOUBLE BREAK-OFF PLUG | 1 | ||
| R910757519 | STRAIGHT PIN | 1 | ||
| R910998240 | NUT | 1 | ||
| R910961839 | CAP NUT | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 4100 psi (280 bar), maximum pressure 5100 psi (350 bar) | A10VS |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 10 | 10 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | Splined shaft ISO 3019-1 reduced diameter, not for through drive | U |
| Mounting flange | ISO 3019-1 2-hole | C |
| Through drive | Without through drive | N00 |