Unit · POMPA OSIOWO-TŁOKOWA
A A10VSO 71 DFR /31R-PSA12K07 -S1627R902439238
Axial piston pump Bosch Rexroth series A10VSO, type code AA10VSO71DFR/31R-PSA12K07-S1627, material number R902439238. Nominal size: NG 71. Axial piston unit: swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar (A10VS). Operating mode: pump, open circuit (O). Control device: with flow controller X-T open hydraulic (DFR). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: NBR (nitrile rubber) only with use of HFA, HFB, HFC hydraulic fluid (P). Drive shaft: splined shaft standard shaft ISO 3019-1 (S). Mounting flange: ISO 3019-2 2-hole (A). Working port: SAE flange ports according to ISO 6162, metric fastening thread laterally opposite (12). Through drive: 127-2 (C) 1 1/4 in 14T 12/24DP (K07). Special version no. 1627.
- Number
- R902439238
- Type code
- A A10VSO 71 DFR /31R-PSA12K07 -S1627
- Group
- A10VSO 71
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902439221 | ZESPÓŁ PODSTAWY Assembly parts list →L | 1 | ||
| R902453430 | ZAWÓR REGULACYJNY Assembly parts list →L | 1 | ||
| R910921653 | ADAPTER Assembly parts list →L | 1 | ||
| 70 | R902421946 | ZABEZPIECZENIE TRANSPORTOWE | 1 | |
| 71 | R902421949 | ZABEZPIECZENIE TRANSPORTOWE | 1 | |
| 72 | R902602011 | ŚRUBA USZCZELNIAJĄCA | 1 | |
| 73 | R902602008 | ŚRUBA USZCZELNIAJĄCA | 1 | |
| 74 | R902602979 | POKRYWA KOŁNIERZA | 1 | |
| 75 | R909830326 | TABLICZKA ZNAMIONOWA | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar | A10VS |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 71 | 71 |
| Control device | with flow controller X-T open hydraulic | DFR |
| Series | Series 3, index 1 | 31 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | NBR (nitrile rubber) only with use of HFA, HFB, HFC hydraulic fluid | P |
| Drive shaft | Splined shaft standard shaft ISO 3019-1 | S |
| Mounting flange | ISO 3019-2 2-hole | A |
| Working port | SAE flange ports according to ISO 6162, metric fastening thread laterally opposite | 12 |
| Through drive | 127-2 (C) 1 1/4 in 14T 12/24DP | K07 |