Unit · AXIAL-PISTON PUMP
A A10V O 28LA8DS/53R-VSC12H00 -S2035R902447507
Axial piston pump Bosch Rexroth series A10VO, type code AA10VO28LA8DS/53R-VSC12H00-S2035, material number R902447507. Nominal size: NG 28. Axial piston unit: swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (A10V). Operating mode: pump, open circuit (O). Control devices: pressure cut-off from 161 to 240 bar, separate flow control hydraulic beginning of control.D (LA8DS). Directions of rotation: viewed on drive shaft clockwise (R). Seal: FKM (fluorocarbon rubber) (V). Mounting flange: based on SAE B; 2-hole ISO 3019-1 (SAE) (C). Working port: at bottom, on opposite side, metric fastening thread (12). Special version no. 2035.
- Number
- R902447507
- Type code
- A A10V O 28LA8DS/53R-VSC12H00 -S2035
- Group
- A10VO 28
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902426502 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902450439 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R902470570 | CONTROL VALVE Assembly parts list →L | 1 | |
| 13 | R902447221 | PIPING Assembly parts list →L | 1 | |
| 20 | R909400264 | THROTTLE SCREW | 1 | |
| 21 | R902429190 | THROTTLE PIN | 1 | |
| 22 | R909400263 | THROTTLE SCREW | 1 | |
| 24 | R910109592 | SOCKET HEAD CAP SCREW | 2 | |
| 27 | R910991691 | SPLINED COUPLING | 1 | |
| 28 | 0510425048 | HYDRAULIC GEAR PUMPL | 1 | |
| 30 | R910901969 | SCREW PLUG | 2 | |
| 40 | R902424207 | STOP SCREW | 1 | |
| 43 | R910804886 | O-RING | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar | A10V |
| Operating mode | Pump, open circuit | O |
| Sizes (NG) | 28 | 28 |
| Control devices | pressure cut-off from 161 to 240 bar, separate flow control hydraulic beginning of control.D | LA8DS |
| Directions of rotation | Viewed on drive shaft clockwise | R |
| Seal | FKM (fluorocarbon rubber) | V |
| Mounting flange | Based on SAE B; 2-hole ISO 3019-1 (SAE) | C |
| Working port | at bottom, on opposite side, metric fastening thread | 12 |