Unit · BASE UNIT
GA10VO180OV/32R-VWD73UXXLRR902452971
Base unit Bosch Rexroth series A10VO, type code GA10VO180OV/32R-VWD73UXXLR, material number R902452971. Nominal size: NG 180. Axial piston unit: swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (A10V). Operating mode: pump, open circuit (O). Directions of rotation: viewed on drive shaft clockwise (R). Seal: FKM (fluorocarbon rubber) (V). Drive shaft: same as shaft "U", but for higher torque, limited suitability for through drive (W). Mounting flange: based on ISO 3019-1 (SAE) SAE C; 4-hole (D).
- Number
- R902452971
- Type code
- GA10VO180OV/32R-VWD73UXXLR
- Group
- A10VO 180
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902449624 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R902449650 | ADJUSTING PIECE Assembly parts list →L | 1 | ||
| R902446959 | PUMP HOUSING | 1 | ||
| R902449661 | CONNECTION PLATE | 1 | ||
| R902467006 | SWASH PLATE | 1 | ||
| R902449662 | DRIVE SHAFT | 1 | ||
| R902446965 | ADJUSTMENT SHIM | 1 | ||
| R902446966 | STOP RING | 1 | ||
| R910918203 | TAPERED-ROLLER BEARING | 1 | ||
| R902650949 | TAPERED-ROLLER BEARING | 1 | ||
| R902453958 | BEARING SHELL | 2 | ||
| R910993660 | COUNTERSUNK-HEAD SCREW | 2 | ||
| R909831178 | SHAFT SEALING RINGD | 1 | ||
| R910930461 | O-RINGD | 1 | ||
| R910366889 | O-RINGD | 4 | ||
| R902650856 | O-RINGD | 1 | ||
| R910941920 | RETAINING RING | 1 | ||
| R910659169 | SOCKET HEAD CAP SCREW | 4 | ||
| R909831319 | DOUBLE BREAK-OFF PLUG | 1 | ||
| R910922017 | STRAIGHT PIN | 1 | ||
| R910106879 | SLOTTED SPRING PIN | 1 | ||
| R902459568 | SEGMENT | 2 | ||
| R902493284 | SPACER SLEEVE | 4 | ||
| R902530617 | SOCKET HEAD CAP SCREW | 4 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar | A10V |
| Operating mode | Pump, open circuit | O |
| Sizes (NG) | 180 | 180 |
| Series | Series 3, index 2 | 32 |
| Directions of rotation | Viewed on drive shaft clockwise | R |
| Seal | FKM (fluorocarbon rubber) | V |
| Drive shaft | same as shaft "U", but for higher torque, limited suitability for through drive | W |
| Mounting flange | Based on ISO 3019-1 (SAE) SAE C; 4-hole | D |